Messages in this thread | | | Subject | Re: [PATCH v4 0/3] extcon: usbc-tusb320: Initial TUSB320L support | From | Chanwoo Choi <> | Date | Thu, 16 Sep 2021 02:22:42 +0900 |
| |
On 21. 9. 2. 오전 1:13, Yassine Oudjana wrote: > The TUSB320L is a newer chip with additional features. It is close enough to TUSB320 so it works > to some extent out-of-the-box, but for some reason it can start in UFP mode which is not desirable. > > This series adds support for reset and mode setting for both chips, and does that while probing > to ensure the chip starts with the default mode of following the PORT pin. > > Changes since v3: > - Remove unused tusb_modes. > - Remove extra blank line. > Changes since v2: > - Read state before setting default mode, then update it again after resetting. > - Remove mode tracing from irq handler > - Add a delay after reset to handle tSOFT_RESET > - Use a separate mode setting function for each of TUSB320 and TUSB320L. > Changes since v1: > - Split first patch into two patches, one adding support for mode setting and reset on TUSB320, > and the other adding support for TUSB320L. > - Fix dt_binding_check warning: > ../Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml:15:6: [warning] wrong indentation: expected 6 but found 5 (indentation) > > Yassine Oudjana (3): > extcon: usbc-tusb320: Add support for mode setting and reset > extcon: usbc-tusb320: Add support for TUSB320L > dt-bindings: extcon: usbc-tusb320: Add TUSB320L compatible string > > .../bindings/extcon/extcon-usbc-tusb320.yaml | 4 +- > drivers/extcon/extcon-usbc-tusb320.c | 156 +++++++++++++++++- > 2 files changed, 154 insertions(+), 6 deletions(-) >
Applied them. Thanks.
-- Best Regards, Samsung Electronics Chanwoo Choi
| |