lkml.org 
[lkml]   [2021]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] clk: qcom: smd-rpm: Add rate hooks for clk_smd_rpm_branch_ops
On Tue, Sep 14, 2021 at 07:55:21PM -0700, Bjorn Andersson wrote:
> On Mon 13 Sep 19:55 PDT 2021, Shawn Guo wrote:
>
> > On QCM2290 platform, the clock xo_board runs at 38400000, while the
> > child clock bi_tcxo needs to run at 19200000. That said,
> > clk_smd_rpm_branch_ops needs the capability of setting rate. Add rate
> > hooks into clk_smd_rpm_branch_ops to make it possible.
> >
>
> Most platforms has a crystal oscillator ticking at 38.4MHz feeding the
> PMIC (represented by the rpmcc and its "xo" parent) and out comes the
> bi_tcxo with a fixed 19.2MHz rate.

Yeah, but all those platforms are running clk-rpmh driver, I think.

> Is there a problem with the way sdm660_bi_tcxo is defined in this
> regard?

There is no problem if xo clock is 19.2MHz, but for platforms with
38.4MHz xo, bi_tcxo will be seen as 38.4MHz in clock tree, while we
expect it to be 19.2MHz.

Shawn

\
 
 \ /
  Last update: 2021-09-15 17:15    [W:0.081 / U:1.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site