lkml.org 
[lkml]   [2021]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next 1/8] MIPS: lantiq: dma: add small delay after reset
From
Date
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Tue, 14 Sep 2021 23:20:58 +0200 you wrote:
> Reading the DMA registers immediately after the reset causes
> Data Bus Error. Adding a small delay fixes this issue.
>
> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
> ---
> arch/mips/lantiq/xway/dma.c | 3 +++
> 1 file changed, 3 insertions(+)

Here is the summary with links:
- [net-next,1/8] MIPS: lantiq: dma: add small delay after reset
https://git.kernel.org/netdev/net-next/c/c12aa581f6d5
- [net-next,2/8] MIPS: lantiq: dma: reset correct number of channel
https://git.kernel.org/netdev/net-next/c/5ca9ce2ba4d5
- [net-next,3/8] MIPS: lantiq: dma: fix burst length for DEU
https://git.kernel.org/netdev/net-next/c/5ad74d39c51d
- [net-next,4/8] MIPS: lantiq: dma: make the burst length configurable by the drivers
https://git.kernel.org/netdev/net-next/c/49293bbc50cb
- [net-next,5/8] net: lantiq: configure the burst length in ethernet drivers
https://git.kernel.org/netdev/net-next/c/14d4e308e0aa
- [net-next,6/8] dt-bindings: net: lantiq-xrx200-net: convert to the json-schema
https://git.kernel.org/netdev/net-next/c/5535bcfa725a
- [net-next,7/8] dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings
https://git.kernel.org/netdev/net-next/c/dac0bad93741
- [net-next,8/8] dt-bindings: net: lantiq: Add the burst length properties
https://git.kernel.org/netdev/net-next/c/c68872146489

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html


\
 
 \ /
  Last update: 2021-09-15 12:31    [W:0.097 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site