lkml.org 
[lkml]   [2021]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/2] net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
Date
Since the GPIO driver (gpio-mlxbf2.c) supports interrupt handling,
replace the custom routine with simple IRQ request.

Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
---
.../net/ethernet/mellanox/mlxbf_gige/Makefile | 1 -
.../ethernet/mellanox/mlxbf_gige/mlxbf_gige.h | 12 -
.../mellanox/mlxbf_gige/mlxbf_gige_gpio.c | 212 ------------------
.../mellanox/mlxbf_gige/mlxbf_gige_main.c | 22 +-
4 files changed, 9 insertions(+), 238 deletions(-)
delete mode 100644 drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c

diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile b/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile
index e57c1375f236..a97c2bef846b 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile
@@ -3,7 +3,6 @@
obj-$(CONFIG_MLXBF_GIGE) += mlxbf_gige.o

mlxbf_gige-y := mlxbf_gige_ethtool.o \
- mlxbf_gige_gpio.o \
mlxbf_gige_intr.o \
mlxbf_gige_main.o \
mlxbf_gige_mdio.o \
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
index e3509e69ed1c..86826a70f9dd 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
@@ -51,11 +51,6 @@
#define MLXBF_GIGE_ERROR_INTR_IDX 0
#define MLXBF_GIGE_RECEIVE_PKT_INTR_IDX 1
#define MLXBF_GIGE_LLU_PLU_INTR_IDX 2
-#define MLXBF_GIGE_PHY_INT_N 3
-
-#define MLXBF_GIGE_MDIO_DEFAULT_PHY_ADDR 0x3
-
-#define MLXBF_GIGE_DEFAULT_PHY_INT_GPIO 12

struct mlxbf_gige_stats {
u64 hw_access_errors;
@@ -81,11 +76,7 @@ struct mlxbf_gige {
struct platform_device *pdev;
void __iomem *mdio_io;
struct mii_bus *mdiobus;
- void __iomem *gpio_io;
- struct irq_domain *irqdomain;
- u32 phy_int_gpio_mask;
spinlock_t lock; /* for packet processing indices */
- spinlock_t gpio_lock; /* for GPIO bus access */
u16 rx_q_entries;
u16 tx_q_entries;
u64 *tx_wqe_base;
@@ -184,7 +175,4 @@ int mlxbf_gige_poll(struct napi_struct *napi, int budget);
extern const struct ethtool_ops mlxbf_gige_ethtool_ops;
void mlxbf_gige_update_tx_wqe_next(struct mlxbf_gige *priv);

-int mlxbf_gige_gpio_init(struct platform_device *pdev, struct mlxbf_gige *priv);
-void mlxbf_gige_gpio_free(struct mlxbf_gige *priv);
-
#endif /* !defined(__MLXBF_GIGE_H__) */
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c
deleted file mode 100644
index a8d966db5715..000000000000
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
-
-/* Initialize and handle GPIO interrupt triggered by INT_N PHY signal.
- * This GPIO interrupt triggers the PHY state machine to bring the link
- * up/down.
- *
- * Copyright (C) 2021 NVIDIA CORPORATION & AFFILIATES
- */
-
-#include <linux/acpi.h>
-#include <linux/bitfield.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/gpio/driver.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/irqreturn.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-
-#include "mlxbf_gige.h"
-#include "mlxbf_gige_regs.h"
-
-#define MLXBF_GIGE_GPIO_CAUSE_FALL_EN 0x48
-#define MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x80
-#define MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0 0x94
-#define MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE 0x98
-
-static void mlxbf_gige_gpio_enable(struct mlxbf_gige *priv)
-{
- unsigned long flags;
- u32 val;
-
- spin_lock_irqsave(&priv->gpio_lock, flags);
- val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
- val |= priv->phy_int_gpio_mask;
- writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
-
- /* The INT_N interrupt level is active low.
- * So enable cause fall bit to detect when GPIO
- * state goes low.
- */
- val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN);
- val |= priv->phy_int_gpio_mask;
- writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN);
-
- /* Enable PHY interrupt by setting the priority level */
- val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
- val |= priv->phy_int_gpio_mask;
- writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
- spin_unlock_irqrestore(&priv->gpio_lock, flags);
-}
-
-static void mlxbf_gige_gpio_disable(struct mlxbf_gige *priv)
-{
- unsigned long flags;
- u32 val;
-
- spin_lock_irqsave(&priv->gpio_lock, flags);
- val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
- val &= ~priv->phy_int_gpio_mask;
- writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
- spin_unlock_irqrestore(&priv->gpio_lock, flags);
-}
-
-static irqreturn_t mlxbf_gige_gpio_handler(int irq, void *ptr)
-{
- struct mlxbf_gige *priv;
- u32 val;
-
- priv = ptr;
-
- /* Check if this interrupt is from PHY device.
- * Return if it is not.
- */
- val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0);
- if (!(val & priv->phy_int_gpio_mask))
- return IRQ_NONE;
-
- /* Clear interrupt when done, otherwise, no further interrupt
- * will be triggered.
- */
- val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
- val |= priv->phy_int_gpio_mask;
- writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
-
- generic_handle_irq(priv->phy_irq);
-
- return IRQ_HANDLED;
-}
-
-static void mlxbf_gige_gpio_mask(struct irq_data *irqd)
-{
- struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd);
-
- mlxbf_gige_gpio_disable(priv);
-}
-
-static void mlxbf_gige_gpio_unmask(struct irq_data *irqd)
-{
- struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd);
-
- mlxbf_gige_gpio_enable(priv);
-}
-
-static struct irq_chip mlxbf_gige_gpio_chip = {
- .name = "mlxbf_gige_phy",
- .irq_mask = mlxbf_gige_gpio_mask,
- .irq_unmask = mlxbf_gige_gpio_unmask,
-};
-
-static int mlxbf_gige_gpio_domain_map(struct irq_domain *d,
- unsigned int irq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_data(irq, d->host_data);
- irq_set_chip_and_handler(irq, &mlxbf_gige_gpio_chip, handle_simple_irq);
- irq_set_noprobe(irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops mlxbf_gige_gpio_domain_ops = {
- .map = mlxbf_gige_gpio_domain_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-#ifdef CONFIG_ACPI
-static int mlxbf_gige_gpio_resources(struct acpi_resource *ares,
- void *data)
-{
- struct acpi_resource_gpio *gpio;
- u32 *phy_int_gpio = data;
-
- if (ares->type == ACPI_RESOURCE_TYPE_GPIO) {
- gpio = &ares->data.gpio;
- *phy_int_gpio = gpio->pin_table[0];
- }
-
- return 1;
-}
-#endif
-
-void mlxbf_gige_gpio_free(struct mlxbf_gige *priv)
-{
- irq_dispose_mapping(priv->phy_irq);
- irq_domain_remove(priv->irqdomain);
-}
-
-int mlxbf_gige_gpio_init(struct platform_device *pdev,
- struct mlxbf_gige *priv)
-{
- struct device *dev = &pdev->dev;
- struct resource *res;
- u32 phy_int_gpio = 0;
- int ret;
-
- LIST_HEAD(resources);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, MLXBF_GIGE_RES_GPIO0);
- if (!res)
- return -ENODEV;
-
- priv->gpio_io = devm_ioremap(dev, res->start, resource_size(res));
- if (!priv->gpio_io)
- return -ENOMEM;
-
-#ifdef CONFIG_ACPI
- ret = acpi_dev_get_resources(ACPI_COMPANION(dev),
- &resources, mlxbf_gige_gpio_resources,
- &phy_int_gpio);
- acpi_dev_free_resource_list(&resources);
- if (ret < 0 || !phy_int_gpio) {
- dev_err(dev, "Error retrieving the gpio phy pin");
- return -EINVAL;
- }
-#endif
-
- priv->phy_int_gpio_mask = BIT(phy_int_gpio);
-
- mlxbf_gige_gpio_disable(priv);
-
- priv->hw_phy_irq = platform_get_irq(pdev, MLXBF_GIGE_PHY_INT_N);
-
- priv->irqdomain = irq_domain_add_simple(NULL, 1, 0,
- &mlxbf_gige_gpio_domain_ops,
- priv);
- if (!priv->irqdomain) {
- dev_err(dev, "Failed to add IRQ domain\n");
- return -ENOMEM;
- }
-
- priv->phy_irq = irq_create_mapping(priv->irqdomain, 0);
- if (!priv->phy_irq) {
- irq_domain_remove(priv->irqdomain);
- priv->irqdomain = NULL;
- dev_err(dev, "Error mapping PHY IRQ\n");
- return -EINVAL;
- }
-
- ret = devm_request_irq(dev, priv->hw_phy_irq, mlxbf_gige_gpio_handler,
- IRQF_ONESHOT | IRQF_SHARED, "mlxbf_gige_phy", priv);
- if (ret) {
- dev_err(dev, "Failed to request PHY IRQ");
- mlxbf_gige_gpio_free(priv);
- return ret;
- }
-
- return ret;
-}
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
index 3e85b17f5857..4382ec8f7d64 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
@@ -273,8 +273,8 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
void __iomem *llu_base;
void __iomem *plu_base;
void __iomem *base;
+ int addr, phy_irq;
u64 control;
- int addr;
int err;

base = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MAC);
@@ -309,20 +309,12 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
priv->pdev = pdev;

spin_lock_init(&priv->lock);
- spin_lock_init(&priv->gpio_lock);

/* Attach MDIO device */
err = mlxbf_gige_mdio_probe(pdev, priv);
if (err)
return err;

- err = mlxbf_gige_gpio_init(pdev, priv);
- if (err) {
- dev_err(&pdev->dev, "PHY IRQ initialization failed\n");
- mlxbf_gige_mdio_remove(priv);
- return -ENODEV;
- }
-
priv->base = base;
priv->llu_base = llu_base;
priv->plu_base = plu_base;
@@ -343,6 +335,12 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
priv->rx_irq = platform_get_irq(pdev, MLXBF_GIGE_RECEIVE_PKT_INTR_IDX);
priv->llu_plu_irq = platform_get_irq(pdev, MLXBF_GIGE_LLU_PLU_INTR_IDX);

+ phy_irq = acpi_dev_gpio_irq_get_by(ACPI_COMPANION(&pdev->dev), "phy-gpios", 0);
+ if (phy_irq < 0) {
+ dev_err(&pdev->dev, "Error getting PHY irq. Use polling instead");
+ phy_irq = PHY_POLL;
+ }
+
phydev = phy_find_first(priv->mdiobus);
if (!phydev) {
err = -ENODEV;
@@ -350,8 +348,8 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
}

addr = phydev->mdio.addr;
- priv->mdiobus->irq[addr] = priv->phy_irq;
- phydev->irq = priv->phy_irq;
+ priv->mdiobus->irq[addr] = phy_irq;
+ phydev->irq = phy_irq;

err = phy_connect_direct(netdev, phydev,
mlxbf_gige_adjust_link,
@@ -387,7 +385,6 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
return 0;

out:
- mlxbf_gige_gpio_free(priv);
mlxbf_gige_mdio_remove(priv);
return err;
}
@@ -398,7 +395,6 @@ static int mlxbf_gige_remove(struct platform_device *pdev)

unregister_netdev(priv->netdev);
phy_disconnect(priv->netdev->phydev);
- mlxbf_gige_gpio_free(priv);
mlxbf_gige_mdio_remove(priv);
platform_set_drvdata(pdev, NULL);

--
2.30.1
\
 
 \ /
  Last update: 2021-09-16 00:36    [W:0.086 / U:8.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site