lkml.org 
[lkml]   [2021]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 15/18] staging: r8188eu: hal: Clean up usbctrl_vendorreq()
Date
Clean up usbctrl_vendorreq () in usb_ops_linux.c because some
of its code will be reused in this series. This cleanup is in
preparation for shortening the call chains of rtw_read{8,16,32}()
and rtw_write{8,16,32,N}(). More insights about the reasons why at
https://lore.kernel.org/lkml/5319192.FrU0QrjFp7@localhost.localdomain/

Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---

v3->v4:
Make this patch.
v2->v3:
No changes.
v1->v2:
No changes.

drivers/staging/r8188eu/hal/usb_ops_linux.c | 62 +++++++++------------
1 file changed, 27 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index 117213c9f984..2c7e92085a6e 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -8,15 +8,15 @@
#include "../include/recv_osdep.h"
#include "../include/rtl8188e_hal.h"

-static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata, u16 len, u8 requesttype)
+static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u16 len, u8 requesttype)
{
- struct adapter *adapt = pintfhdl->padapter;
- struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
- struct usb_device *udev = dvobjpriv->pusbdev;
- unsigned int pipe;
int status = 0;
- u8 *pIo_buf;
+ u8 *io_buf;
+ unsigned int pipe;
int vendorreq_times = 0;
+ struct adapter *adapt = intfhdl->padapter;
+ struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
+ struct usb_device *udev = dvobjpriv->pusbdev;

if ((adapt->bSurpriseRemoved) || (adapt->pwrctrlpriv.pnp_bstop_trx)) {
status = -EPERM;
@@ -32,51 +32,44 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
mutex_lock(&dvobjpriv->usb_vendor_req_mutex);

/* Acquire IO memory for vendorreq */
- pIo_buf = dvobjpriv->usb_vendor_req_buf;
-
- if (!pIo_buf) {
- DBG_88E("[%s] pIo_buf == NULL\n", __func__);
- status = -ENOMEM;
- goto release_mutex;
- }
+ io_buf = dvobjpriv->usb_vendor_req_buf;

if (requesttype == REALTEK_USB_VENQT_READ)
- pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
+ /* read in */
+ pipe = usb_rcvctrlpipe(udev, 0);
else
- pipe = usb_sndctrlpipe(udev, 0);/* write_out */
+ /* write out */
+ pipe = usb_sndctrlpipe(udev, 0);

while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
if (requesttype == REALTEK_USB_VENQT_READ)
- memset(pIo_buf, 0, len);
+ memset(io_buf, 0, len);
else
- memcpy(pIo_buf, pdata, len);
+ memcpy(io_buf, data, len);

status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
requesttype, value, REALTEK_USB_VENQT_CMD_IDX,
- pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
+ io_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);

- if (status == len) { /* Success this control transfer. */
+ if (status == len) {
+ /* success */
rtw_reset_continual_urb_error(dvobjpriv);
if (requesttype == REALTEK_USB_VENQT_READ)
- memcpy(pdata, pIo_buf, len);
- } else { /* error cases */
- DBG_88E("reg 0x%x, usb %s %u fail, status:%d value=0x%x, vendorreq_times:%d\n",
- value, (requesttype == REALTEK_USB_VENQT_READ) ? "read" : "write",
- len, status, *(u32 *)pdata, vendorreq_times);
-
+ memcpy(data, io_buf, len);
+ } else {
+ /* errors */
if (status < 0) {
- if (status == (-ESHUTDOWN) || status == -ENODEV) {
+ if (status == (-ESHUTDOWN || -ENODEV)) {
adapt->bSurpriseRemoved = true;
} else {
- struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
haldata->srestpriv.wifi_error_status = USB_VEN_REQ_CMD_FAIL;
}
- } else { /* status != len && status >= 0 */
+ } else {
+ /* status != len && status >= 0 */
if (status > 0) {
- if (requesttype == REALTEK_USB_VENQT_READ) {
- /* For Control read transfer, we have to copy the read data from pIo_buf to pdata. */
- memcpy(pdata, pIo_buf, len);
- }
+ if (requesttype == REALTEK_USB_VENQT_READ)
+ memcpy(data, io_buf, len);
}
}

@@ -86,12 +79,11 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
}

}
-
- /* firmware download is checksumed, don't retry */
+ /* firmware download is checksummed, don't retry */
if ((value >= FW_8188E_START_ADDRESS && value <= FW_8188E_END_ADDRESS) || status == len)
break;
}
-release_mutex:
+
mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
exit:
return status;
--
2.33.0
\
 
 \ /
  Last update: 2021-09-13 20:14    [W:0.197 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site