lkml.org 
[lkml]   [2021]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 10/10] ARM: dts: at91: sama7g5ek: enable ADC on the board
Date
The ADC controller on the board is fed by a 2.5V reference voltage.
By default the channels #14 and #15 are dedicated to analog input
(marked AN on the board), on the connectors mikrobus1 and mikrobus2.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
arch/arm/boot/dts/at91-sama7g5ek.dts | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index 4cbed98cc2f4..c46be165f2ba 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -122,6 +122,14 @@ spdif_out: spdif-out {
};
};

+&adc {
+ vddana-supply = <&vddout25>;
+ vref-supply = <&vddout25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vddcpu>;
};
--
2.25.1
\
 
 \ /
  Last update: 2021-09-01 14:33    [W:0.148 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site