lkml.org 
[lkml]   [2021]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/5] mmc: sdhci: fix base clock usage in preset value
From
Date
On 25/07/21 12:20 pm, Michał Mirosław wrote:
> Fixed commit added an unnecessary read of CLOCK_CONTROL. The value read
> is overwritten for programmable clock preset, but is carried over for
> divided clock preset. This can confuse sdhci_enable_clk() if the register
> has enable bits set for some reason at time time of clock calculation.

"time time" -> "time"

> Remove the read.
>
> Quoting Al Cooper:
>
> sdhci_brcmstb_set_clock() assumed that sdhci_calc_clk() would always
> return the divider value without the enable set, so this fixes a case
> for DDR52 where the enable was not being cleared when the divider
> value was changed.
>
> Cc: stable@vger.kernel.org
> Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function")
> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> Acked-by: Al Cooper <alcooperx@gmail.com>

Apart from above:

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

>
> ---
> v4: no changes
> v3: updated commit message
> v2: removed truncated sentence from commitmsg
>
> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> ---
> drivers/mmc/host/sdhci.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index aba6e10b8605..c7438dd13e3e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1857,7 +1857,6 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> if (host->preset_enabled) {
> u16 pre_val;
>
> - clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> pre_val = sdhci_get_preset_value(host);
> div = FIELD_GET(SDHCI_PRESET_SDCLK_FREQ_MASK, pre_val);
> if (host->clk_mul &&
>

\
 
 \ /
  Last update: 2021-08-04 12:50    [W:0.080 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site