lkml.org 
[lkml]   [2021]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
On Wed, Aug 25, 2021 at 08:09:02PM +0300, Evgeny Novikov wrote:
> ehci_orion_drv_probe() did not account for possible errors of
> clk_prepare_enable() that in particular could cause invocation of
> clk_disable_unprepare() on clocks that were not prepared/enabled yet,
> e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
> there were several patches fixing different issues with clocks in this
> driver, they did not solve this problem.
>
> Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
> to avoid calls of clk_disable_unprepare() without previous successful
> invocation of clk_prepare_enable().
>
> Found by Linux Driver Verification project (linuxtesting.org).
>
> Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks")
> Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
> Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
> Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
> ---

Acked-by: Alan Stern <stern@rowland.harvard.edu>

Do you intend to submit patches for the other EHCI drivers that don't
check for errors in clk_prepare_enable()? It looks like
ehci-atmel.c, ehci-mv.c, and ehci-spear.c all need some attention.

The same is true for a bunch of the OHCI drivers: ohci-at91.c,
ohci-exynos.c, ohci-s3c2410.c, and ohci-spear.c.

Didn't the Linux Driver Verification project identify this problem in
all of these drivers?

Alan Stern

> drivers/usb/host/ehci-orion.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
> index a319b1df3011..3626758b3e2a 100644
> --- a/drivers/usb/host/ehci-orion.c
> +++ b/drivers/usb/host/ehci-orion.c
> @@ -264,8 +264,11 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
> * the clock does not exists.
> */
> priv->clk = devm_clk_get(&pdev->dev, NULL);
> - if (!IS_ERR(priv->clk))
> - clk_prepare_enable(priv->clk);
> + if (!IS_ERR(priv->clk)) {
> + err = clk_prepare_enable(priv->clk);
> + if (err)
> + goto err_put_hcd;
> + }
>
> priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
> if (IS_ERR(priv->phy)) {
> @@ -311,6 +314,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
> err_dis_clk:
> if (!IS_ERR(priv->clk))
> clk_disable_unprepare(priv->clk);
> +err_put_hcd:
> usb_put_hcd(hcd);
> err:
> dev_err(&pdev->dev, "init %s fail, %d\n",
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2021-08-25 19:29    [W:0.124 / U:4.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site