lkml.org 
[lkml]   [2021]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC net-next v2 3/4] net: dsa: mt7530: set STP state also on filter ID 1
Date
On Mon, Aug 02, 2021 at 04:43:36PM +0300, Vladimir Oltean wrote:
> On Sun, Aug 01, 2021 at 03:10:21AM +0800, DENG Qingfang wrote:
> > --- a/drivers/net/dsa/mt7530.h
> > +++ b/drivers/net/dsa/mt7530.h
> > @@ -181,7 +181,7 @@ enum mt7530_vlan_egress_attr {
> >
> > /* Register for port STP state control */
> > #define MT7530_SSP_P(x) (0x2000 + ((x) * 0x100))
> > -#define FID_PST(x) ((x) & 0x3)
>
> Shouldn't these macros have _two_ arguments, the FID and the port state?
>
> > +#define FID_PST(x) (((x) & 0x3) * 0x5)
>
> "* 5": explanation?
>
> > #define FID_PST_MASK FID_PST(0x3)
> >
> > enum mt7530_stp_state {
> > --
> > 2.25.1
> >
>
> I don't exactly understand how this patch works, sorry.
> Are you altering port state only on bridged ports, or also on standalone
> ports after this patch? Are standalone ports in the proper STP state
> (FORWARDING)?

The current code only sets FID 0's STP state. This patch sets both 0's and
1's states.

The *5 part is binary magic. [1:0] is FID 0's state, [3:2] is FID 1's state
and so on. Since 5 == 4'b0101, the value in [1:0] is copied to [3:2] after
the multiplication.

Perhaps I should only change FID 1's state.

\
 
 \ /
  Last update: 2021-08-02 17:33    [W:0.076 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site