lkml.org 
[lkml]   [2021]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/6] dt-bindings: drm/panel-simple: Introduce generic eDP panels
Date
On Fri, 30 Jul 2021 14:26:20 -0700, Douglas Anderson wrote:
> eDP panels generally contain almost everything needed to control them
> in their EDID. This comes from their DP heritage were a computer needs
> to be able to properly control pretty much any DP display that's
> plugged into it.
>
> The one big issue with eDP panels and the reason that we need a panel
> driver for them is that the power sequencing can be different per
> panel.
>
> While it is true that eDP panel sequencing can be arbitrarily complex,
> in practice it turns out that many eDP panels are compatible with just
> some slightly different delays. See the contents of the bindings file
> introduced in this patch for some details.
>
> The fact that eDP panels are 99% probable and that the power
> sequencing (especially power up) can be compatible between many panels
> means that there's a constant desire to plug multiple different panels
> into the same board. This could be for second sourcing purposes or to
> support multiple SKUs (maybe a 11" and a 13", for instance).
>
> As discussed [1], it should be OK to support this by adding two
> properties to the device tree to specify the delays needed for
> powering up the panel the first time. We'll create a new "edp-panel"
> bindings file and define the two delays that might need to be
> specified. NOTE: in the vast majority of the cases (HPD is hooked up
> and isn't glitchy or is debounced) even these delays aren't needed.
>
> [1] https://lore.kernel.org/r/CAD=FV=VZYOMPwQZzWdhJGh5cjJWw_EcM-wQVEivZ-bdGXjPrEQ@mail.gmail.com
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> Changes in v2:
> - No longer allow fallback to panel-simple.
> - Add "-ms" suffix to delays.
>
> .../bindings/display/panel/panel-edp.yaml | 188 ++++++++++++++++++
> 1 file changed, 188 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/panel-edp.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/panel/panel-edp.example.dt.yaml: bridge@2d: 'aux-bus' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1511822

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2021-08-02 15:40    [W:0.697 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site