lkml.org 
[lkml]   [2021]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] backlight: pwm_bl: Improve bootloader/kernel device handover
On Thu, 22 Jul 2021, Daniel Thompson wrote:

> Currently there are (at least) two problems in the way pwm_bl starts
> managing the enable_gpio pin. Both occur when the backlight is initially
> off and the driver finds the pin not already in output mode and, as a
> result, unconditionally switches it to output-mode and asserts the signal.
>
> Problem 1: This could cause the backlight to flicker since, at this stage
> in driver initialisation, we have no idea what the PWM and regulator are
> doing (an unconfigured PWM could easily "rest" at 100% duty cycle).
>
> Problem 2: This will cause us not to correctly honour the
> post_pwm_on_delay (which also risks flickers).
>
> Fix this by moving the code to configure the GPIO output mode until after
> we have examines the handover state. That allows us to initialize
> enable_gpio to off if the backlight is currently off and on if the
> backlight is on.
>
> Reported-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: stable@vger.kernel.org
> Acked-by: Marek Vasut <marex@denx.de>
> Tested-by: Marek Vasut <marex@denx.de>
> ---
> drivers/video/backlight/pwm_bl.c | 54 +++++++++++++++++---------------
> 1 file changed, 28 insertions(+), 26 deletions(-)

Applied, thanks.

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2021-08-19 12:00    [W:0.043 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site