Messages in this thread | | | From | Anand Moon <> | Subject | [PATCHv3 0/6] Meson-8b and Meson-gxbb Fix some missing code | Date | Tue, 17 Aug 2021 09:45:34 +0530 |
| |
On Odroid C1+ and Odroid C2 USB feature is broken
It's being observed the after initiation of USB phy the USB port goes in to suspend state, If we pass usbcore.autosuspend=-1 via command line USB hotplug seen to be working.
Another issue I observed is increase of USB interrupts event even if there is not much activity on USB ports.
$ cat /proc/interrupts | grep usb 35: 26462800 0 0 0 GIC-0 63 Level c90c0000.usb, dwc2_hsotg:usb1 8 Changes added power node to usb phy and small code cleanup in usb phy.
Previous version RFC. [0] https://patchwork.kernel.org/project/linux-amlogic/cover/20210617194154.2397-1-linux.amoon@gmail.com/ Dopped the reorder of code changes as of now.
V1 > changes Fixed the GPIO input signal on Odroid C1+/C2 New patch added to fix Odroid C2.
[1] https://lore.kernel.org/linux-devicetree/20210716103651.1455-1-linux.amoon@gmail.com/
V2 > changes Fixed the GPIO polarity for Odroid C1 fix the power source from phy-supply to vbus-supply added new patches to fix resolve some issues.
Thanks -Anand
Anand Moon (6): ARM: dts: meson8b: odroidc1: Add usb phy power node ARM: dts: meson8b: odroidc1: Set usb power source to always on arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power arm64: dts: amlogic: odroidc2: use vbus-supply for power source for usb nodes phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
arch/arm/boot/dts/meson8b-odroidc1.dts | 21 ++++++++++++++++++- .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++----- drivers/phy/amlogic/phy-meson8b-usb2.c | 8 +++++-- 3 files changed, 30 insertions(+), 9 deletions(-)
-- 2.32.0
| |