lkml.org 
[lkml]   [2021]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V4 4/8] i3c: master: svc: add support for slave to stop returning data
Hi Clark,

Just a few nitpicks.

Clark Wang <xiaoning.wang@nxp.com> wrote on Mon, 9 Aug 2021 14:36:41
+0800:

> When i3c controller reads data from slave device, slave device can stop
> returning data with an ACK after any byte.
> Add this support for svc i3c controller. Otherwise, it will go TIMEOUT

"it will timeout when the slave..."

> error path when the slave device ends the read operation early.
>
> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
> Reviewed-by: Jun Li <jun.li@nxp.com>
> ---
> V4 changes:
> - Only use COMPLETE flag in the read function.
> - Add a reset before each transfer.
> V2/V3: No change.
> ---
> drivers/i3c/master/svc-i3c-master.c | 56 ++++++++++++++++++++---------
> 1 file changed, 39 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
> index 4e69c691253d..e767f307db2d 100644
> --- a/drivers/i3c/master/svc-i3c-master.c
> +++ b/drivers/i3c/master/svc-i3c-master.c
> @@ -896,27 +896,35 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
> static int svc_i3c_master_read(struct svc_i3c_master *master,
> u8 *in, unsigned int len)
> {
> - int offset = 0, i, ret;
> - u32 mdctrl;
> + int offset = 0, i;
> + u32 mdctrl, mstatus;
> + bool completed = false;
> + unsigned int count;
> + unsigned long start = jiffies;
>
> - while (offset < len) {
> - unsigned int count;
> + while (!completed) {
> + mstatus = readl(master->regs + SVC_I3C_MSTATUS);
> + if (SVC_I3C_MSTATUS_COMPLETE(mstatus) != 0)
> + completed = true;
>
> - ret = readl_poll_timeout(master->regs + SVC_I3C_MDATACTRL,
> - mdctrl,
> - !(mdctrl & SVC_I3C_MDATACTRL_RXEMPTY),
> - 0, 1000);
> - if (ret)
> - return ret;
> + if (time_after(jiffies, start + msecs_to_jiffies(1000))) {
> + dev_dbg(master->dev, "<%s> timeout\n", __func__);

Can you get rid of this <%s>/__func__ parameter and just tell that we
got a read timeout?

> + return -ETIMEDOUT;
> + }
>
> + mdctrl = readl(master->regs + SVC_I3C_MDATACTRL);
> count = SVC_I3C_MDATACTRL_RXCOUNT(mdctrl);
> + if (offset + count > len) {
> + dev_err(master->dev, "<%s> recv len too long!\n",
> + __func__);
> + return -EINVAL;
> + }

And is this something theoretical or a real error that can happen?

If you think this is really needed, please keep the same dev_err()
formatting as in the other places in this driver.

> for (i = 0; i < count; i++)
> in[offset + i] = readl(master->regs + SVC_I3C_MRDATAB);
> -

Please keep that space

> offset += count;
> }
>
> - return 0;
> + return offset;
> }
>
> static int svc_i3c_master_write(struct svc_i3c_master *master,
> @@ -949,7 +957,7 @@ static int svc_i3c_master_write(struct svc_i3c_master *master,
> static int svc_i3c_master_xfer(struct svc_i3c_master *master,
> bool rnw, unsigned int xfer_type, u8 addr,
> u8 *in, const u8 *out, unsigned int xfer_len,
> - unsigned int read_len, bool continued)
> + unsigned int *read_len, bool continued)
> {
> u32 reg;
> int ret;
> @@ -959,7 +967,7 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
> SVC_I3C_MCTRL_IBIRESP_NACK |
> SVC_I3C_MCTRL_DIR(rnw) |
> SVC_I3C_MCTRL_ADDR(addr) |
> - SVC_I3C_MCTRL_RDTERM(read_len),
> + SVC_I3C_MCTRL_RDTERM(*read_len),
> master->regs + SVC_I3C_MCTRL);
>
> ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
> @@ -971,17 +979,25 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
> ret = svc_i3c_master_read(master, in, xfer_len);
> else
> ret = svc_i3c_master_write(master, out, xfer_len);
> - if (ret)
> + if (ret < 0)
> goto emit_stop;

Space?

> + if (rnw)
> + *read_len = ret;
>
> ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
> SVC_I3C_MSTATUS_COMPLETE(reg), 0, 1000);
> if (ret)
> goto emit_stop;

Space?

> + writel(SVC_I3C_MINT_COMPLETE, master->regs + SVC_I3C_MSTATUS);
>
> - if (!continued)
> + if (!continued) {
> svc_i3c_master_emit_stop(master);
>
> + /* Wait idle if stop is sent. */
> + readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
> + !SVC_I3C_MSTATUS_STATE(reg), 0, 1000);

Please use _MSTATUS_STATE_IDLE() for more clarity.

If this wait loop is really needed, better adding it to
_master_emit_stop()? (in another patch)

> + }
> +
> return 0;
>
> emit_stop:
> @@ -1039,12 +1055,15 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
> if (!xfer)
> return;
>
> + svc_i3c_master_clear_merrwarn(master);
> + svc_i3c_master_flush_fifo(master);
> +
> for (i = 0; i < xfer->ncmds; i++) {
> struct svc_i3c_cmd *cmd = &xfer->cmds[i];
>
> ret = svc_i3c_master_xfer(master, cmd->rnw, xfer->type,
> cmd->addr, cmd->in, cmd->out,
> - cmd->len, cmd->read_len,
> + cmd->len, &cmd->read_len,
> cmd->continued);
> if (ret)
> break;
> @@ -1173,6 +1192,9 @@ static int svc_i3c_master_send_direct_ccc_cmd(struct svc_i3c_master *master,
> if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
> svc_i3c_master_dequeue_xfer(master, xfer);
>
> + if (cmd->read_len != xfer_len)
> + ccc->dests[0].payload.len = cmd->read_len;
> +
> ret = xfer->ret;
> svc_i3c_master_free_xfer(xfer);
>

Thanks,
Miquèl

\
 
 \ /
  Last update: 2021-08-16 09:15    [W:0.111 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site