lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RFC 00/12] Enroll kernel keys thru MOK
From
Date

> On Jul 7, 2021, at 11:00 AM, Mimi Zohar <zohar@linux.ibm.com> wrote:
>
> On Wed, 2021-07-07 at 10:28 -0600, Eric Snowberg wrote:
>>> On Jul 7, 2021, at 6:39 AM, Mimi Zohar <zohar@linux.ibm.com> wrote:
>>>
>>> On Tue, 2021-07-06 at 22:43 -0400, Eric Snowberg wrote:
>>>> This is a follow up to the "Add additional MOK vars" [1] series I
>>>> previously sent. This series incorporates the feedback given
>>>> both publicly on the mailing list and privately from Mimi. This
>>>> series just focuses on getting end-user keys into the kernel trust
>>>> boundary.
>>>>
>>>> Currently, pre-boot keys are not trusted within the Linux boundary [2].
>>>> Pre-boot keys include UEFI Secure Boot DB keys and MOKList keys. These
>>>> keys are loaded into the platform keyring and can only be used for kexec.
>>>> If an end-user wants to use their own key within the Linux trust
>>>> boundary, they must either compile it into the kernel themselves or use
>>>> the insert-sys-cert script. Both options present a problem. Many
>>>> end-users do not want to compile their own kernels. With the
>>>> insert-sys-cert option, there are missing upstream changes [3]. Also,
>>>> with the insert-sys-cert option, the end-user must re-sign their kernel
>>>> again with their own key, and then insert that key into the MOK db.
>>>> Another problem with insert-sys-cert is that only a single key can be
>>>> inserted into a compressed kernel.
>>>>
>>>> Having the ability to insert a key into the Linux trust boundary opens
>>>> up various possibilities. The end-user can use a pre-built kernel and
>>>> sign their own kernel modules. It also opens up the ability for an
>>>> end-user to more easily use digital signature based IMA-appraisal. To
>>>> get a key into the ima keyring, it must be signed by a key within the
>>>> Linux trust boundary.
>>>>
>>>> Downstream Linux distros try to have a single signed kernel for each
>>>> architecture. Each end-user may use this kernel in entirely different
>>>> ways. Some downstream kernels have chosen to always trust platform keys
>>>> within the Linux trust boundary for kernel module signing. These
>>>> kernels have no way of using digital signature base IMA appraisal.
>>>>
>>>> This series adds a new MOK variable to shim. This variable allows the
>>>> end-user to decide if they want to trust keys enrolled in the MOK within
>>>> the Linux trust boundary. By default, nothing changes; MOK keys are
>>>> not trusted within the Linux kernel. They are only trusted after the
>>>> end-user makes the decision themselves. The end-user would set this
>>>> through mokutil using a new --trust-mok option [4]. This would work
>>>> similar to how the kernel uses MOK variable to enable/disable signature
>>>> validation as well as use/ignore the db.
>>>>
>>>> When shim boots, it mirrors the new MokTML Boot Services variable to a new
>>>> MokListTrustedRT Runtime Services variable and extends PCR14.
>>>> MokListTrustedRT is written without EFI_VARIABLE_NON_VOLATILE set,
>>>> preventing an end-user from setting it after booting and doing a kexec.
>>>>
>>>> When the kernel boots, if MokListTrustedRT is set and
>>>> EFI_VARIABLE_NON_VOLATILE is not set, the MokListRT is loaded into the
>>>> secondary trusted keyring instead of the platform keyring. Mimi has
>>>> suggested that only CA keys or keys that can be vouched for by other
>>>> kernel keys be loaded. All other certs will load into the platform
>>>> keyring instead.
>>>
>>> Loading MOK CA keys onto the "secondary" keyring would need to be an
>>> exception. Once CA keys are loaded onto the "secondary" keyring, any
>>> certificates signed by those CA keys may be loaded normally, without
>>> needing an exception, onto the "secondary" keyring. The kernel MAY
>>> load those keys onto the "secondary" keyring, but really doesn't need
>>> to be involved.
>>>
>>> Loading ALL of the MOK db keys onto either the "secondary" or
>>> "platform" keyrings makes the code a lot more complicated. Is it
>>> really necessary?
>>
>> Today all keys are loaded into the platform keyring. For kexec_file_load,
>> the platform and secondary keys are trusted the same. If this series were
>> not to load them all into either keyring, it would be a kexec_file_load
>> regression, since keys that previously loaded into the platform keyring
>> could be missing. The complexity arises from the CA key restriction.
>> If that requirement was removed, this series would be much smaller.
>
> To prevent the regression, allow the the existing firmware/UEFI keys to
> continue to be loaded on the platform keyring, as it is currently being
> done. The new code would load just the MOK db CA keys onto the
> secondary keyring, based on the new UEFI variable. This is the only
> code that would require a
> "restrict_link_by_builtin_and_secondary_trusted" exemption. The code
> duplication would be minimal in comparison to the complexity being
> introduced.

This series was written with the following three requirements in mind:

1. Only CA keys that were originally bound for the platform keyring
can enter the secondary keyring.

2. No key in the UEFI Secure Boot DB, CA or not, may enter the
secondary keyring, only MOKList keys may be trusted.

3. A new MOK variable is added to signify the user wants to trust
MOKList keys.

Given these requirements, I started down the path I think you are
suggesting. However I found it to be more complex. If we load all
keys into the platform keyring first and later try to load only CA keys,
we don’t have a way of knowing where the platform key came from.
Platform keys can originate from the UEFI Secure Boot DB or the MOKList.
This would violate the second requirement. This caused me to need to
create a new keyring handler. [PATCH RFC 10/12] integrity: add new
keyring handler.

To satisfy the first requirement a new restriction is required. This
is contained in [PATCH RFC 03/12] KEYS: CA link restriction.

To satisfy the third requirement, we must read the new MOK var. This
is contained in [PATCH RFC 06/12] integrity: Trust mok keys if
MokListTrustedRT found.

The patches above make up a majority of the new code.

The remaining code of creating a new .mok keyring was done with code
reuse in mind. Many of the required functions necessary to add this
capability is already contained in integrity_ functions. If the
operation was done directly on the secondary keyring, similar code
would need to be added to certs/system_keyring.c. Just like how the
platform keyring is created within integrity code, the mok keyring
is created in the same fashion. When the platform keyring has
completed initialization and loaded all its keys, the keyring is set
into system_keyring code using set_platform_trusted_keys. Instead of
setting the mok keyring, I’m moving the keys directly into the secondary
keyring, while bypassing the current restriction placed on this keyring.
Basically I'm trying to follow the same design pattern.

If requirements #1, #2 or both (#1 and #2) could be dropped, most of
this series would not be necessary.

\
 
 \ /
  Last update: 2021-07-08 00:12    [W:0.090 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site