lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 11/11] media: dt-bindings: Convert Cadence CSI2RX binding to YAML
On 01/07/21 12:55PM, Rob Herring wrote:
> On Fri, Jun 25, 2021 at 12:52:00AM +0530, Pratyush Yadav wrote:
> > Convert the Cadence CSI2RX binding to use YAML schema.
> >
> > Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> >
> > ---
> >
> > Changes in v3:
> > - Add compatible: contains: const: cdns,csi2rx to allow SoC specific
> > compatible.
> > - Add more constraints for data-lanes property.
> >
> > Changes in v2:
> > - New in v2.
> >
> > .../devicetree/bindings/media/cdns,csi2rx.txt | 100 -----------
> > .../bindings/media/cdns,csi2rx.yaml | 169 ++++++++++++++++++
> > 2 files changed, 169 insertions(+), 100 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> > create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> > deleted file mode 100644
> > index 6b02a0657ad9..000000000000
> > --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> > +++ /dev/null
> > @@ -1,100 +0,0 @@
> > -Cadence MIPI-CSI2 RX controller
> > -===============================
> > -
> > -The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
> > -lanes in input, and 4 different pixel streams in output.
> > -
> > -Required properties:
> > - - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
> > - - reg: base address and size of the memory mapped region
> > - - clocks: phandles to the clocks driving the controller
> > - - clock-names: must contain:
> > - * sys_clk: main clock
> > - * p_clk: register bank clock
> > - * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
> > - implemented in hardware, between 0 and 3
> > -
> > -Optional properties:
> > - - phys: phandle to the external D-PHY, phy-names must be provided
> > - - phy-names: must contain "dphy", if the implementation uses an
> > - external D-PHY
> > -
> > -Required subnodes:
> > - - ports: A ports node with one port child node per device input and output
> > - port, in accordance with the video interface bindings defined in
> > - Documentation/devicetree/bindings/media/video-interfaces.txt. The
> > - port nodes are numbered as follows:
> > -
> > - Port Description
> > - -----------------------------
> > - 0 CSI-2 input
> > - 1 Stream 0 output
> > - 2 Stream 1 output
> > - 3 Stream 2 output
> > - 4 Stream 3 output
> > -
> > - The stream output port nodes are optional if they are not
> > - connected to anything at the hardware level or implemented
> > - in the design.Since there is only one endpoint per port,
> > - the endpoints are not numbered.
> > -
> > -
> > -Example:
> > -
> > -csi2rx: csi-bridge@0d060000 {
> > - compatible = "cdns,csi2rx";
> > - reg = <0x0d060000 0x1000>;
> > - clocks = <&byteclock>, <&byteclock>
> > - <&coreclock>, <&coreclock>,
> > - <&coreclock>, <&coreclock>;
> > - clock-names = "sys_clk", "p_clk",
> > - "pixel_if0_clk", "pixel_if1_clk",
> > - "pixel_if2_clk", "pixel_if3_clk";
> > -
> > - ports {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - port@0 {
> > - reg = <0>;
> > -
> > - csi2rx_in_sensor: endpoint {
> > - remote-endpoint = <&sensor_out_csi2rx>;
> > - clock-lanes = <0>;
> > - data-lanes = <1 2>;
> > - };
> > - };
> > -
> > - port@1 {
> > - reg = <1>;
> > -
> > - csi2rx_out_grabber0: endpoint {
> > - remote-endpoint = <&grabber0_in_csi2rx>;
> > - };
> > - };
> > -
> > - port@2 {
> > - reg = <2>;
> > -
> > - csi2rx_out_grabber1: endpoint {
> > - remote-endpoint = <&grabber1_in_csi2rx>;
> > - };
> > - };
> > -
> > - port@3 {
> > - reg = <3>;
> > -
> > - csi2rx_out_grabber2: endpoint {
> > - remote-endpoint = <&grabber2_in_csi2rx>;
> > - };
> > - };
> > -
> > - port@4 {
> > - reg = <4>;
> > -
> > - csi2rx_out_grabber3: endpoint {
> > - remote-endpoint = <&grabber3_in_csi2rx>;
> > - };
> > - };
> > - };
> > -};
> > diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> > new file mode 100644
> > index 000000000000..8e42c9fdaaa3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> > @@ -0,0 +1,169 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Cadence MIPI-CSI2 RX controller
> > +
> > +description: |
> > + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
> > + lanes in input, and 4 different pixel streams in output.
> > +
> > +maintainers:
> > + - Pratyush Yadav <p.yadav@ti.com>
> > +
> > +properties:
> > + compatible:
> > + contains:
> > + const: cdns,csi2rx
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + minItems: 3
> > + maxItems: 6
> > +
> > + clock-names:
> > + minItems: 3
> > + maxItems: 6
>
> maxItems can be dropped here. Implied by items length.

Ok.

>
> > + items:
> > + - const: sys_clk # main clock
> > + - const: p_clk # register bank clock
> > + - const: pixel_if0_clk # pixel stream 0 output clock
> > + - const: pixel_if1_clk # pixel stream 1 output clock
> > + - const: pixel_if2_clk # pixel stream 2 output clock
> > + - const: pixel_if3_clk # pixel stream 3 output clock
> > +
> > + phys:
> > + maxItems: 1
> > + description: phandle to the external D-PHY
> > +
> > + phy-names:
> > + items:
> > + - const: dphy
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description: CSI-2 input
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + clock-lanes:
> > + maxItems: 1
> > +
> > + data-lanes:
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> Don't need a type here.

Ok.

>
> > + minItems: 1
> > + maxItems: 4
> > + uniqueItems: true
>
> uniqueItems should be added in video-interfaces.yaml.

Ok. I will send that change as a separate patch independent of this
series.

Thanks for reviewing.

>
> > + items:
> > + maximum: 4
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
[...]

--
Regards,
Pratyush Yadav
Texas Instruments Inc.

\
 
 \ /
  Last update: 2021-07-07 20:46    [W:0.064 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site