lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] soc: qcom: rpmhpd: Use corner in power_off
On Wed 07 Jul 01:31 CDT 2021, Rajendra Nayak wrote:

>
>
> On 7/7/2021 10:19 AM, Bjorn Andersson wrote:
> > On Mon 05 Jul 00:40 CDT 2021, Rajendra Nayak wrote:
> > > On 7/5/2021 10:36 AM, Bjorn Andersson wrote:
> > > > On Sun, Jul 4, 2021 at 11:27 PM Rajendra Nayak <rnayak@codeaurora.org> wrote:
> > > > >
> > > > >
> > > > >
> > > > > On 7/3/2021 6:24 AM, Bjorn Andersson wrote:
> > > > > > rpmhpd_aggregate_corner() takes a corner as parameter, but in
> > > > > > rpmhpd_power_off() the code requests the level of the first corner
> > > > > > instead.
> > > > > >
> > > > > > In all (known) current cases the first corner has level 0, so this
> > > > > > change should be a nop, but in case that there's a power domain with a
> > > > > > non-zero lowest level this makes sure that rpmhpd_power_off() actually
> > > > > > requests the lowest level - which is the closest to "power off" we can
> > > > > > get.
> > > > > >
> > > > > > While touching the code, also skip the unnecessary zero-initialization
> > > > > > of "ret".
> > > > > >
> > > > > > Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
> > > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > > > > ---
> > > > > > drivers/soc/qcom/rpmhpd.c | 5 ++---
> > > > > > 1 file changed, 2 insertions(+), 3 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
> > > > > > index 2daa17ba54a3..fa209b479ab3 100644
> > > > > > --- a/drivers/soc/qcom/rpmhpd.c
> > > > > > +++ b/drivers/soc/qcom/rpmhpd.c
> > > > > > @@ -403,12 +403,11 @@ static int rpmhpd_power_on(struct generic_pm_domain *domain)
> > > > > > static int rpmhpd_power_off(struct generic_pm_domain *domain)
> > > > > > {
> > > > > > struct rpmhpd *pd = domain_to_rpmhpd(domain);
> > > > > > - int ret = 0;
> > > > > > + int ret;
> > > > > >
> > > > > > mutex_lock(&rpmhpd_lock);
> > > > > >
> > > > > > - ret = rpmhpd_aggregate_corner(pd, pd->level[0]);
> > > > > > -
> > > > > > + ret = rpmhpd_aggregate_corner(pd, 0);
> > > > >
> > > > > This won't work for cases where pd->level[0] != 0, rpmh would just ignore this and keep the
> > > > > resource at whatever corner it was previously at.
> > > > > (unless command DB tells you a 0 is 'valid' for a resource, sending a 0 is a nop)
> > > > > The right thing to do is to send in whatever command DB tells you is the lowest level that's valid,
> > > > > which is pd->level[0].
> > > > >
> > > >
> > > > I'm afraid this doesn't make sense to me.
> > > >
> > > > In rpmh_power_on() if cmd-db tells us that we have [0, 64, ...] and we
> > > > request 64 we rpmhpd_aggregate_corner(pd, 1); but in power off, if
> > > > cmd-db would provide [64, ...] we would end up sending
> > > > rpmhpd_aggregate_corner(pd, 64);
> > > > So in power_on we request the corner (i.e. index in the array provided
> > > > in cmd-db) and in power-off the same function takes the level?
> > >
> > > ah that's right, I did not read the commit log properly and got confused.
> >
> > Thanks for confirming my understanding.
> >
> > > Looks like this bug existed from the day this driver for merged :/, thanks
> > > for catching it.
> > > Does it make sense to also mark this fix for stable?
> > >
> >
> > I can certainly add a Cc: stable@ as I'm applying this.
>
> sure, sounds good
> > May I have your R-b?
>
> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
>

Thank you.

> >
> > PS. Do you have any input on patch 2/2? That actually solves a practical
> > problem we're seeing. Would it perhaps aid in your need for the new
> > "assigned-opp-level" property?
>
> We would perhaps still need the 'assigned-opp-level' or equivalent since
> the default requirement of devices is not always the least level supported,
> in some cases it might be slightly higher corner which would then need to
> be set explicitly.
>

Right, for situations where we use assign-clock-rates to drive up the
clock rate this mechanism might be needed in order to keep things
stable.

But I presume as soon as you have some sort of dynamic nature to that
you'll be back to an opp-table and the means we already have.

> I was hoping on getting some more testing done with that patch especially for
> any regression on the sc7180 and sc7280 devices, which I haven't got to yet.
> Are you getting these patches ready for merge for the -rc cycle or for the
> next merge window?
>

That would be much appreciated, I've not done extensive testing myself,
mostly just booted a few different boards.

But I would like to see us correct the MDSS_GDSC->MMCX setup in time for
v5.15, in particular since we have a few new users of the mmcx
power-domain-regulator arriving in this cycle.

Regards,
Bjorn

\
 
 \ /
  Last update: 2021-07-07 17:50    [W:0.088 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site