lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gpio: wcove: remove platform_set_drvdata() + cleanup probe
On Wed, Jul 07, 2021 at 04:52:26PM +0300, Alexandru Ardelean wrote:
> The platform_set_drvdata() call is only useful if we need to retrieve back
> the private information.
> Since the driver doesn't do that, it's not useful to have it.

This is fine.

> This change also changes the probe order a bit, moving the
> devm_gpiochip_add_data() as the last call. This means that when the
> gpiochip is registered [and available to consumers], it should be
> initialized.
>
> It's still possible that the devm_gpiochip_add_data() call could fail,
> leaving the chip in a partially initialized state, but that was possible
> even before this change; it was just some other partially initialized
> state.

...

> /* Enable GPIO0 interrupts */

^^^^^

> + return devm_gpiochip_add_data(dev, &wg->chip, wg);

This is dangerous change. How did you test it?

The handler now can be called before chip and actual handling code is
registered. It means at least two possible (bad) scenarios:
1) the handler may dereference dangling or NULL pointer;
2) the IRQ may be level interrupt and we may got 100000 IRQs and
IRQ core will disable it leaving device completely unfunctional.

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2021-07-07 16:09    [W:0.036 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site