lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] hwmon: da9063: HWMON driver
Date
Add the HWMON driver for DA9063

Originally-from: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
---
Changes in v3:
- changed original author's Signed-off-by into an Originally-from.
- dropped license boilerplate
- only return ETIMEOUT if ADC result is not ready by the time the IRQ
either triggered or timed out
- removed unnecessary lists
- changed a duplicate init_comptetion into a more useful reinit_completion
- dropped unused platform_set_drvdata
- moved temperature offset reading from mfd driver

Changes in v2:
- drop of_match_table: this should be meaningless in such sub-function
driver (at least judging by other sub-function drivers for the da9063)
- sort includes
- switch to devm_hwmon_device_register_with_info
- registers.h changes moved to patch 1
- add SPDX header

This patch depends on patch 1/3.
Originally submitted by Steve Twiss in 2014:
https://marc.info/?l=linux-kernel&m=139560868309857&w=2

drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/da9063-hwmon.c | 260 +++++++++++++++++++++++++++++++++++
3 files changed, 271 insertions(+)
create mode 100644 drivers/hwmon/da9063-hwmon.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 87624902ea80..17244cfaa855 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -515,6 +515,16 @@ config SENSORS_DA9055
This driver can also be built as a module. If so, the module
will be called da9055-hwmon.

+config SENSORS_DA9063
+ tristate "Dialog Semiconductor DA9063"
+ depends on MFD_DA9063
+ help
+ If you say yes here you get support for the hardware
+ monitoring features of the DA9063 Power Management IC.
+
+ This driver can also be built as a module. If so, the module
+ will be called da9063-hwmon.
+
config SENSORS_I5K_AMB
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 59e78bc212cf..6855711ed9ec 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o
obj-$(CONFIG_SENSORS_CORSAIR_PSU) += corsair-psu.o
obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
+obj-$(CONFIG_SENSORS_DA9063) += da9063-hwmon.o
obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DRIVETEMP) += drivetemp.o
diff --git a/drivers/hwmon/da9063-hwmon.c b/drivers/hwmon/da9063-hwmon.c
new file mode 100644
index 000000000000..6367685536a1
--- /dev/null
+++ b/drivers/hwmon/da9063-hwmon.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* da9063-hwmon.c - Hardware monitor support for DA9063
+ * Copyright (C) 2014 Dialog Semiconductor Ltd.
+ * Copyright (C) 2021 Vincent Pelletier <plr.vincent@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#define DA9063_ADC_RES (1 << (DA9063_ADC_RES_L_BITS + DA9063_ADC_RES_M_BITS))
+#define DA9063_ADC_MAX (DA9063_ADC_RES - 1)
+#define DA9063_2V5 2500
+#define DA9063_5V0 5000
+#define DA9063_5V5 5500
+#define DA9063_TJUNC_M -398
+#define DA9063_TJUNC_O 330000
+#define DA9063_VBBAT_M 2048
+
+enum da9063_adc {
+ DA9063_CHAN_VSYS = DA9063_ADC_MUX_VSYS,
+ DA9063_CHAN_ADCIN1 = DA9063_ADC_MUX_ADCIN1,
+ DA9063_CHAN_ADCIN2 = DA9063_ADC_MUX_ADCIN2,
+ DA9063_CHAN_ADCIN3 = DA9063_ADC_MUX_ADCIN3,
+ DA9063_CHAN_TJUNC = DA9063_ADC_MUX_T_SENSE,
+ DA9063_CHAN_VBBAT = DA9063_ADC_MUX_VBBAT,
+ DA9063_CHAN_LDO_G1 = DA9063_ADC_MUX_LDO_G1,
+ DA9063_CHAN_LDO_G2 = DA9063_ADC_MUX_LDO_G2,
+ DA9063_CHAN_LDO_G3 = DA9063_ADC_MUX_LDO_G3
+};
+
+struct da9063_hwmon {
+ struct da9063 *da9063;
+ struct mutex hwmon_mutex;
+ struct completion adc_ready;
+ signed char tjunc_offset;
+};
+
+static int da9063_adc_manual_read(struct da9063_hwmon *hwmon, int channel)
+{
+ int ret;
+ unsigned char val;
+ unsigned char data[2];
+ int adc_man;
+
+ mutex_lock(&hwmon->hwmon_mutex);
+
+ val = (channel & DA9063_ADC_MUX_MASK) | DA9063_ADC_MAN;
+ ret = regmap_update_bits(hwmon->da9063->regmap, DA9063_REG_ADC_MAN,
+ DA9063_ADC_MUX_MASK | DA9063_ADC_MAN, val);
+ if (ret < 0)
+ goto err_mread;
+
+ ret = wait_for_completion_timeout(&hwmon->adc_ready,
+ msecs_to_jiffies(100));
+ reinit_completion(&hwmon->adc_ready);
+ if (ret == 0)
+ dev_dbg(hwmon->da9063->dev,
+ "Timeout while waiting for ADC completion IRQ\n");
+
+ ret = regmap_read(hwmon->da9063->regmap, DA9063_REG_ADC_MAN, &adc_man);
+ if (ret < 0)
+ goto err_mread;
+
+ /* data value is not ready */
+ if (adc_man & DA9063_ADC_MAN) {
+ ret = -ETIMEDOUT;
+ goto err_mread;
+ }
+
+ ret = regmap_bulk_read(hwmon->da9063->regmap,
+ DA9063_REG_ADC_RES_L, data, 2);
+ if (ret < 0)
+ goto err_mread;
+
+ ret = (data[0] & DA9063_ADC_RES_L_MASK) >> DA9063_ADC_RES_L_SHIFT;
+ ret |= data[1] << DA9063_ADC_RES_L_BITS;
+err_mread:
+ mutex_unlock(&hwmon->hwmon_mutex);
+ return ret;
+}
+
+static irqreturn_t da9063_hwmon_irq_handler(int irq, void *irq_data)
+{
+ struct da9063_hwmon *hwmon = irq_data;
+
+ complete(&hwmon->adc_ready);
+ return IRQ_HANDLED;
+}
+
+static umode_t da9063_is_visible(const void *drvdata, enum
+ hwmon_sensor_types type, u32 attr, int channel)
+{
+ return 0444;
+}
+
+static const enum da9063_adc da9063_in_index[] = {
+ DA9063_CHAN_VSYS, DA9063_CHAN_VBBAT
+};
+
+static int da9063_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct da9063_hwmon *hwmon = dev_get_drvdata(dev);
+ enum da9063_adc adc_channel;
+ int tmp;
+
+ switch (type) {
+ case hwmon_in:
+ if (attr != hwmon_in_input)
+ return -EOPNOTSUPP;
+ adc_channel = da9063_in_index[channel];
+ break;
+ case hwmon_temp:
+ if (attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+ adc_channel = DA9063_CHAN_TJUNC;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ tmp = da9063_adc_manual_read(hwmon, adc_channel);
+ if (tmp < 0)
+ return tmp;
+
+ switch (adc_channel) {
+ case DA9063_CHAN_VSYS:
+ *val = ((DA9063_5V5 - DA9063_2V5) * tmp) / DA9063_ADC_MAX +
+ DA9063_2V5;
+ break;
+ case DA9063_CHAN_TJUNC:
+ tmp -= hwmon->tjunc_offset;
+ *val = DA9063_TJUNC_M * tmp + DA9063_TJUNC_O;
+ break;
+ case DA9063_CHAN_VBBAT:
+ *val = (DA9063_5V0 * tmp) / DA9063_ADC_MAX;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const char * const da9063_in_name[] = {
+ "VSYS", "VBBAT"
+};
+
+static int da9063_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ switch (type) {
+ case hwmon_in:
+ if (attr != hwmon_in_label)
+ return -EOPNOTSUPP;
+ *str = da9063_in_name[channel];
+ break;
+ case hwmon_temp:
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+ *str = "TJUNC";
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static const struct hwmon_ops da9063_ops = {
+ .is_visible = da9063_is_visible,
+ .read = da9063_read,
+ .read_string = da9063_read_string,
+};
+
+static const struct hwmon_channel_info *da9063_channel_info[] = {
+ HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ NULL
+};
+
+static const struct hwmon_chip_info da9063_chip_info = {
+ .ops = &da9063_ops,
+ .info = da9063_channel_info,
+};
+
+static int da9063_hwmon_probe(struct platform_device *pdev)
+{
+ struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
+ struct da9063_hwmon *hwmon;
+ struct device *hwmon_dev;
+ unsigned int tmp;
+ int irq;
+ int ret;
+
+ hwmon = devm_kzalloc(&pdev->dev, sizeof(struct da9063_hwmon),
+ GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ mutex_init(&hwmon->hwmon_mutex);
+ init_completion(&hwmon->adc_ready);
+ hwmon->da9063 = da9063;
+
+ irq = platform_get_irq_byname(pdev, DA9063_DRVNAME_HWMON);
+ if (irq < 0)
+ return irq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ da9063_hwmon_irq_handler,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "HWMON", hwmon);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request IRQ.\n");
+ return ret;
+ }
+
+ ret = regmap_read(da9063->regmap, DA9063_REG_T_OFFSET, &tmp);
+ if (ret < 0) {
+ tmp = 0;
+ dev_warn(&pdev->dev,
+ "Temperature trimming value cannot be read (defaulting to 0)\n");
+ }
+ hwmon->tjunc_offset = (signed char) tmp;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "da9063",
+ hwmon,
+ &da9063_chip_info,
+ NULL);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct platform_driver da9063_hwmon_driver = {
+ .probe = da9063_hwmon_probe,
+ .driver = {
+ .name = DA9063_DRVNAME_HWMON,
+ },
+};
+module_platform_driver(da9063_hwmon_driver);
+
+MODULE_DESCRIPTION("Hardware monitor support device driver for Dialog DA9063");
+MODULE_AUTHOR("Vincent Pelletier <plr.vincent@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_HWMON);
--
2.32.0
\
 
 \ /
  Last update: 2021-07-07 15:29    [W:8.311 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site