lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: at91: clk-generated: Limit the requested rate to our range
Date
On clk_generated_determine_rate(), the requested rate could be outside
of clk's range. Limit the rate to the clock's range to not return an
error.

Fixes: df70aeef6083 ("clk: at91: add generated clock driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
drivers/clk/at91/clk-generated.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index b4fc8d71daf2..b656d25a9767 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -128,6 +128,12 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
int i;
u32 div;

+ /* do not look for a rate that is outside of our range */
+ if (gck->range.max && req->rate > gck->range.max)
+ req->rate = gck->range.max;
+ if (gck->range.min && req->rate < gck->range.min)
+ req->rate = gck->range.min;
+
for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
if (gck->chg_pid == i)
continue;
--
2.30.2
\
 
 \ /
  Last update: 2021-07-07 15:14    [W:0.098 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site