lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] drm/vc4: hdmi: Make sure the controller is powered up during bind
Date
In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.

Failing to do so will result in a complete, silent, hang of the CPU.

Fixes: 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index aab1b36ceb3c..dac47b100b8b 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2176,6 +2176,18 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi->disable_4kp60 = true;
}

+ /*
+ * We need to have the device powered up at this point to call
+ * our reset hook and for the CEC init.
+ */
+ ret = vc4_hdmi_runtime_resume(dev);
+ if (ret)
+ goto err_put_ddc;
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
if (vc4_hdmi->variant->reset)
vc4_hdmi->variant->reset(vc4_hdmi);

@@ -2187,8 +2199,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
}

- pm_runtime_enable(dev);
-
drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
drm_encoder_helper_add(encoder, &vc4_hdmi_encoder_helper_funcs);

@@ -2208,6 +2218,8 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi_debugfs_regs,
vc4_hdmi);

+ pm_runtime_put_sync(dev);
+
return 0;

err_free_cec:
@@ -2216,6 +2228,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi_connector_destroy(&vc4_hdmi->connector);
err_destroy_encoder:
drm_encoder_cleanup(encoder);
+ pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
err_put_ddc:
put_device(&vc4_hdmi->ddc->dev);
--
2.31.1
\
 
 \ /
  Last update: 2021-07-07 11:25    [W:0.059 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site