lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 02/10] drm/vc4: hdmi: Fix HPD GPIO detection
Date
Prior to commit 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod"), in the
detect hook, if we had an HPD GPIO we would only rely on it and return
whatever state it was in.

However, that commit changed that by mistake to only consider the case
where we have a GPIO and it returns a logical high, and would fall back
to the other methods otherwise.

Since we can read the EDIDs when the HPD signal is low on some displays,
we changed the detection status from disconnected to connected, and we
would ignore an HPD pulse.

Fixes: 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 8779cef13f52..eada68b65402 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -166,9 +166,9 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
bool connected = false;

- if (vc4_hdmi->hpd_gpio &&
- gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) {
- connected = true;
+ if (vc4_hdmi->hpd_gpio) {
+ if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
+ connected = true;
} else if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED) {
connected = true;
}
--
2.31.1
\
 
 \ /
  Last update: 2021-07-07 10:49    [W:0.036 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site