lkml.org 
[lkml]   [2021]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] regulator: sy7636a: Remove the poll_enable_time
Date
From testing on hardware the poll_enable_time isn't required and
sometimes causes the driver probe to fail so let's remove it.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/regulator/sy7636a-regulator.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index e021ae08cbaa..c3b34cac8c7f 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -13,8 +13,6 @@
#include <linux/gpio/consumer.h>
#include <linux/mfd/sy7636a.h>

-#define SY7636A_POLL_ENABLED_TIME 500
-
static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev)
{
int ret;
@@ -61,7 +59,6 @@ static const struct regulator_desc desc = {
.owner = THIS_MODULE,
.enable_reg = SY7636A_REG_OPERATION_MODE_CRL,
.enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF,
- .poll_enabled_time = SY7636A_POLL_ENABLED_TIME,
.regulators_node = of_match_ptr("regulators"),
.of_match = of_match_ptr("vcom"),
};
--
2.31.1
\
 
 \ /
  Last update: 2021-07-06 14:14    [W:0.082 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site