lkml.org 
[lkml]   [2021]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: atmel: fix spelling mistakes
Date
From: Gu Shengxian <gushengxian@yulong.com>

Fix some spelling mistakes as follows:
regaedles ==> regardless
prezent ==> present
underrrun ==> underrun
controlls ==> controls

Signed-off-by: Gu Shengxian <gushengxian@yulong.com>
---
sound/soc/atmel/mchp-spdifrx.c | 6 +++---
sound/soc/atmel/mchp-spdiftx.c | 2 +-
sound/soc/atmel/tse850-pcm5142.c | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index e6ded6f8453f..bcd4f3e4fb0f 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -56,7 +56,7 @@
/* Validity Bit Mode */
#define SPDIFRX_MR_VBMODE_MASK GENAMSK(1, 1)
#define SPDIFRX_MR_VBMODE_ALWAYS_LOAD \
- (0 << 1) /* Load sample regardles of validity bit value */
+ (0 << 1) /* Load sample regardless of validity bit value */
#define SPDIFRX_MR_VBMODE_DISCARD_IF_VB1 \
(1 << 1) /* Load sample only if validity bit is 0 */

@@ -519,7 +519,7 @@ static int mchp_spdifrx_cs_get(struct mchp_spdifrx_dev *dev,
/* check for new data available */
ret = wait_for_completion_interruptible_timeout(&ch_stat->done,
msecs_to_jiffies(100));
- /* IP might not be started or valid stream might not be prezent */
+ /* IP might not be started or valid stream might not be present */
if (ret < 0) {
dev_dbg(dev->dev, "channel status for channel %d timeout\n",
channel);
@@ -571,7 +571,7 @@ static int mchp_spdifrx_subcode_ch_get(struct mchp_spdifrx_dev *dev,
mchp_spdifrx_isr_blockend_en(dev);
ret = wait_for_completion_interruptible_timeout(&user_data->done,
msecs_to_jiffies(100));
- /* IP might not be started or valid stream might not be prezent */
+ /* IP might not be started or valid stream might not be present */
if (ret <= 0) {
dev_dbg(dev->dev, "user data for channel %d timeout\n",
channel);
diff --git a/sound/soc/atmel/mchp-spdiftx.c b/sound/soc/atmel/mchp-spdiftx.c
index 3bd350afb743..d24380046435 100644
--- a/sound/soc/atmel/mchp-spdiftx.c
+++ b/sound/soc/atmel/mchp-spdiftx.c
@@ -80,7 +80,7 @@
#define SPDIFTX_MR_VALID1 BIT(24)
#define SPDIFTX_MR_VALID2 BIT(25)

-/* Disable Null Frame on underrrun */
+/* Disable Null Frame on underrun */
#define SPDIFTX_MR_DNFR_MASK GENMASK(27, 27)
#define SPDIFTX_MR_DNFR_INVALID (0 << 27)
#define SPDIFTX_MR_DNFR_VALID (1 << 27)
diff --git a/sound/soc/atmel/tse850-pcm5142.c b/sound/soc/atmel/tse850-pcm5142.c
index 59e2edb22b3a..50c3dc6936f9 100644
--- a/sound/soc/atmel/tse850-pcm5142.c
+++ b/sound/soc/atmel/tse850-pcm5142.c
@@ -23,7 +23,7 @@
// IN2 +---o--+------------+--o---+ OUT2
// loop2 relays
//
-// The 'loop1' gpio pin controlls two relays, which are either in loop
+// The 'loop1' gpio pin controls two relays, which are either in loop
// position, meaning that input and output are directly connected, or
// they are in mixer position, meaning that the signal is passed through
// the 'Sum' mixer. Similarly for 'loop2'.
--
2.25.1
\
 
 \ /
  Last update: 2021-07-06 12:04    [W:0.042 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site