lkml.org 
[lkml]   [2021]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 3/3] Documentation: hwmon: New information for DA9063
On Tue, Jul 06, 2021 at 02:34:49PM +0000, Vincent Pelletier wrote:
> From: "Opensource [Steve Twiss]" <stwiss.opensource@diasemi.com>
>
> Addition of HWMON documentation for the DA9063 driver.
>
> Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
>
> Updated temperature formula, as of datasheet rev 2.3.
> Converted to ReStructuredText.
>
> Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
> ---
> Changes in v2:
> - ReST-ified
>
> Originally submitted by Steve Twiss in 2014:
> https://marc.info/?l=linux-kernel&m=139560868209856&w=2
>
> Documentation/hwmon/da9063.rst | 73 ++++++++++++++++++++++++++++++++++

Needs to be added to index.rst.

> 1 file changed, 73 insertions(+)
> create mode 100644 Documentation/hwmon/da9063.rst
>
> diff --git a/Documentation/hwmon/da9063.rst b/Documentation/hwmon/da9063.rst
> new file mode 100644
> index 000000000000..aae69c58a5d6
> --- /dev/null
> +++ b/Documentation/hwmon/da9063.rst
> @@ -0,0 +1,73 @@
> +Kernel driver da9063-hwmon
> +==========================
> +
> +Supported chips:
> +
> + * Dialog Semiconductor DA9063 PMIC
> +
> + Prefix: 'da9063'
> +
> + Datasheet: Publicly available at the Dialog Semiconductor website:
> +
> + http://www.dialog-semiconductor.com/products/power-management/DA9063
> +
> +Authors:
> + - S Twiss <stwiss.opensource@diasemi.com>
> + - Vincent Pelletier <plr.vincent@gmail.com>
> +
> +Description
> +-----------
> +
> +The DA9063 PMIC provides a general purpose ADC with 10 bits of resolution.
> +It uses track and hold circuitry with an analogue input multiplexer which
> +allows the conversion of up to 9 different inputs:
> +
> +- Channel 0: VSYS_RES measurement of the system VDD (2.5 - 5.5V)
> +- Channel 1: ADCIN1_RES high impedance input (0 - 2.5V)
> +- Channel 2: ADCIN2_RES high impedance input (0 - 2.5V)
> +- Channel 3: ADCIN3_RES high impedance input (0 - 2.5V)
> +- Channel 4: Tjunc measurement of internal temperature sensor
> +- Channel 5: VBBAT measurement of the backup battery voltage (0 - 5.0V)
> +- Channel 6: N/A Reserved
> +- Channel 7: N/A Reserved
> +- Channel 8: MON1_RES group 1 internal regulators voltage (0 - 5.0V)
> +- Channel 9: MON2_RES group 2 internal regulators voltage (0 - 5.0V)
> +- Channel 10: MON3_RES group 3 internal regulators voltage (0 - 5.0V)
> +
> +The MUX selects from and isolates the 9 inputs and presents the channel to
> +be measured to the ADC input. When selected, an input amplifier on the VSYS
> +channel subtracts the VDDCORE reference voltage and scales the signal to the
> +correct value for the ADC.
> +
> +The analog ADC includes current sources at ADC_IN1, ADC_IN2 and ADC_IN3 to
> +support resistive measurements.
> +
> +Channels 1, 2 and 3 current source capability can be set through the ADC
> +thresholds ADC_CFG register and values for ADCIN1_CUR, ADCIN2_CUR and
> +ADCIN3_CUR. Settings for ADCIN1_CUR and ADCIN2_CUR are 1.0, 2.0, 10 and
> +40 micro Amps. The setting for ADCIN3_CUR is 10 micro Amps.
> +
> +Voltage Monitoring
> +------------------
> +
> +The manual measurement allows monitoring of the system voltage VSYS, the
> +auxiliary channels ADCIN1, ADCIN2 and ADCIN3, and a VBBAT measurement of
> +the backup battery voltage (0 - 5.0V). The manual measurements store 10
> +bits of ADC resolution.
> +
> +The manual ADC measurements attributes described above are supported by
> +the driver.
> +
> +The automatic ADC measurement is not supported by the driver.
> +
> +Temperature Monitoring
> +----------------------
> +
> +Temperatures are sampled by a 10 bit ADC. Junction temperatures
> +are monitored by the ADC channels.
> +
> +The junction temperature is calculated:
> +
> + Degrees celsius = -0.398 * (ADC_RES - T_OFFSET) + 330;
> +
> +The junction temperature attribute is supported by the driver.
> --
> 2.32.0

\
 
 \ /
  Last update: 2021-07-06 19:29    [W:0.066 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site