lkml.org 
[lkml]   [2021]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/3] Add DT bindings and DT nodes for USB in SC7280
Date
This series includes usb controller and phy binding updates
for SC7280 SoC and DT chnages for SC7280 SoC and SC7280 IDP board.

changes in v5:
Added patch for usb3-dp phy bindings for SC7280.
Changed qmp usb phy to usb dp phy combo node as per Stephen's comments.
Changed dwc to usb and added SC7280 compatible as per Bjorn's comments.

changes in v4:
changed usb3-phy to lanes in qmp phy node as it was causing probe failure.

changes in v3:
Moved the board specific changes to separate patch.
Addressed comments from Matthias in v2.

changes in v2:
Dropped dt bindings patches as they are already merged in linux-next.
Addressed comments from Matthias in v1.

Sandeep Maheswaram (3):
dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7280
arm64: dts: qcom: sc7280: Add USB related nodes
arm64: dts: qcom: sc7280: Add USB nodes for IDP board

.../bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 1 +
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 39 +++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 164 +++++++++++++++++++++
3 files changed, 204 insertions(+)

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2021-07-06 15:02    [W:0.101 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site