lkml.org 
[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] Documentation: hwmon: New information for DA9063
Date
From: "Opensource [Steve Twiss]" <stwiss.opensource@diasemi.com>

Addition of HWMON documentation for the DA9063 driver.

Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>

Updated temperature formula, as of datasheet rev 2.3.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
---
Originally submitted by Steve Twiss in 2014:
https://marc.info/?l=linux-kernel&m=139560868209856&w=2

Documentation/hwmon/da9063 | 67 ++++++++++++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/hwmon/da9063

diff --git a/Documentation/hwmon/da9063 b/Documentation/hwmon/da9063
new file mode 100644
index 000000000000..879f1d0fb3e4
--- /dev/null
+++ b/Documentation/hwmon/da9063
@@ -0,0 +1,67 @@
+
+Kernel driver da9063-hwmon
+==========================
+
+Supported chips:
+ * Dialog Semiconductor DA9063 PMIC
+ Prefix: 'da9063'
+ Datasheet:
+ http://www.dialog-semiconductor.com/products/power-management/DA9063
+
+Authors: S Twiss <stwiss.opensource@diasemi.com>
+
+Description
+-----------
+
+The DA9063 PMIC provides a general purpose ADC with 10 bits of resolution.
+It uses track and hold circuitry with an analogue input multiplexer which
+allows the conversion of up to 9 different inputs.
+
+ Channel 0: VSYS_RES measurement of the system VDD (2.5 - 5.5V)
+ Channel 1: ADCIN1_RES high impedance input (0 - 2.5V)
+ Channel 2: ADCIN2_RES high impedance input (0 - 2.5V)
+ Channel 3: ADCIN3_RES high impedance input (0 - 2.5V)
+ Channel 4: Tjunc measurement of internal temperature sensor
+ Channel 5: VBBAT measurement of the backup battery voltage (0 - 5.0V)
+ Channel 6: N/A Reserved
+ Channel 7: N/A Reserved
+ Channel 8: MON1_RES group 1 internal regulators voltage (0 - 5.0V)
+ Channel 9: MON2_RES group 2 internal regulators voltage (0 - 5.0V)
+ Channel 10: MON3_RES group 3 internal regulators voltage (0 - 5.0V)
+
+The MUX selects from and isolates the 9 inputs and presents the channel to
+be measured to the ADC input. When selected, an input amplifier on the VSYS
+channel subtracts the VDDCORE reference voltage and scales the signal to the
+correct value for the ADC.
+
+The analog ADC includes current sources at ADC_IN1, ADC_IN2 and ADC_IN3 to
+support resistive measurements.
+
+Channels 1, 2 and 3 current source capability can be set through the ADC
+thresholds ADC_CFG register and values for ADCIN1_CUR, ADCIN2_CUR and
+ADCIN3_CUR. Settings for ADCIN1_CUR and ADCIN2_CUR are 1.0, 2.0, 10 and
+40 micro Amps. The setting for ADCIN3_CUR is 10 micro Amps.
+
+Voltage Monitoring
+------------------
+
+The manual measurement allows monitoring of the system voltage VSYS, the
+auxiliary channels ADCIN1, ADCIN2 and ADCIN3, and a VBBAT measurement of
+the backup battery voltage (0 - 5.0V). The manual measurements store 10
+bits of ADC resolution.
+
+The manual ADC measurements attributes described above are supported by
+the driver.
+
+The automatic ADC measurement is not supported by the driver.
+
+Temperature Monitoring
+----------------------
+
+Channel 4 (Tjunc) will be used to measure the output of the internal
+temperature sensor. The ADC measurement result and the T_OFFSET value can
+be used by the host to calculate the internal junction temperature
+
+ Tjunc = -0.398 * (ADC - T_OFFSET) + 330;
+
+The junction temperature attribute is supported by the driver.
--
2.32.0
\
 
 \ /
  Last update: 2021-07-06 02:03    [W:0.037 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site