lkml.org 
[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
From
Date
On 7/5/21 6:49 AM, Pavo Banicevic wrote:
> From: Luka Kovacic <luka.kovacic@sartura.hr>
>
> Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.
>
> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
> Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> Cc: Robert Marko <robert.marko@sartura.hr>
> ---
> .../hwmon/iei-wt61p803-puzzle-hwmon.rst | 42 +++++++++++++++++++

Needs to be added to index.rst.

> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
>
> diff --git a/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
> new file mode 100644
> index 000000000000..04b01e53760c
> --- /dev/null
> +++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst > @@ -0,0 +1,42 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +
> +Kernel driver iei-wt61p803-puzzle-hwmon
> +=======================================
> +
> +Supported chips:
> + * IEI WT61P803 PUZZLE for IEI Puzzle M801
> +
> + Prefix: 'iei-wt61p803-puzzle-hwmon'
> +
> +Author: Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +
> +Description
> +-----------
> +
> +This driver adds fan and temperature sensor reading for some IEI Puzzle
> +series boards.
> +
> +Sysfs attributes
> +----------------
> +
> +The following attributes are supported:
> +
> +- IEI WT61P803 PUZZLE for IEI Puzzle M801
> +
> +/sys files in hwmon subsystem
> +-----------------------------
> +
> +================= == ===================================================
> +fan[1-5]_input RO files for fan speed (in RPM)
> +pwm[1-2] RW files for fan[1-2] target duty cycle (0..255)

There are also temperature sensors.

> +================= == ===================================================
> +
> +/sys files in thermal subsystem
> +-------------------------------
> +
> +================= == ====================================================
> +cur_state RW file for current cooling state of the cooling device
> + (0..max_state)
> +max_state RO file for maximum cooling state of the cooling device
> +================= == ====================================================
>

\
 
 \ /
  Last update: 2021-07-05 18:15    [W:0.082 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site