lkml.org 
[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] mfd: atmel-flexcom: use resume_noirq
Date
Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation
mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might
be connected critical devices (like PMIC) which on suspend/resume should
be suspended/resumed at the end/beginning. i2c uses
.suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom
to use .resume_noirq as it should be resumed before the embedded IPs.
Otherwise the embedded devices might behave badly.

Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/mfd/atmel-flexcom.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
index 962f66dc8813..559eb4d352b6 100644
--- a/drivers/mfd/atmel-flexcom.c
+++ b/drivers/mfd/atmel-flexcom.c
@@ -87,7 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);

-static int __maybe_unused atmel_flexcom_resume(struct device *dev)
+static int __maybe_unused atmel_flexcom_resume_noirq(struct device *dev)
{
struct atmel_flexcom *ddata = dev_get_drvdata(dev);
int err;
@@ -105,8 +105,9 @@ static int __maybe_unused atmel_flexcom_resume(struct device *dev)
return 0;
}

-static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
- atmel_flexcom_resume);
+static const struct dev_pm_ops atmel_flexcom_pm_ops = {
+ .resume_noirq = atmel_flexcom_resume_noirq,
+};

static struct platform_driver atmel_flexcom_driver = {
.probe = atmel_flexcom_probe,
--
2.25.1
\
 
 \ /
  Last update: 2021-07-05 13:34    [W:0.077 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site