[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 net-next 0/3] net: stmmac: re-configure tas basetime after ptp time adjust
If the DWMAC Ethernet device has already set the Qbv EST configuration
before using ptp to synchronize the time adjustment, the Qbv base time
may change to be the past time of the new current time. This is not
allowed by hardware.

This patch calculates and re-configures the Qbv basetime after ptp time

Update est mutex lock to protect btr/ctr r/w to be atomic.
Add btr_reserve to store basetime from qopt and used as origin base
time in Qbv re-configuration.

Xiaoliang Yang (3):
net: stmmac: separate the tas basetime calculation function
net: stmmac: add mutex lock to protect est parameters
net: stmmac: ptp: update tas basetime after ptp adjust

drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 ++
.../net/ethernet/stmicro/stmmac/stmmac_ptp.c | 41 ++++++++++++++++-
.../net/ethernet/stmicro/stmmac/stmmac_tc.c | 46 +++++++++++++------
include/linux/stmmac.h | 1 +
4 files changed, 77 insertions(+), 14 deletions(-)


 \ /
  Last update: 2021-07-05 12:16    [W:0.108 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site