lkml.org 
[lkml]   [2021]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] watchdog: Respect handle_boot_enabled when setting last last_hw_keepalive
From
Date
On 30.07.21 22:49, Guenter Roeck wrote:
> On 7/30/21 12:39 PM, Jan Kiszka wrote:
>> From: Jan Kiszka <jan.kiszka@siemens.com>
>>
>> We must not pet a running watchdog when handle_boot_enabled is off
>> because this requests to only start doing that via userspace, not during
>> probing.
>>
>
> The scope of the changed function is quite limited. See the
> definition of watchdog_set_last_hw_keepalive(). On top of that,
> __watchdog_ping() does a bit more than just ping the watchdog,
> and it only pings the watchdog in limited circumstances. On top of that,
> the scope of handle_boot_enabled is different: If enabled, it tells
> the watchdog core to keep pinging a watchdog until userspace opens
> the device. This is about continuous pings, not about an initial one.
> Given that, I'd rather have the watchdog subsystem issue an additional
> ping than risking a regression.
>
> The only driver calling watchdog_set_last_hw_keepalive() is rti_wdt.c.
> Does this patch solve a specific problem observed with that watchdog ?

Yes, it unbreaks support for handle_boot_enabled=no by not starting the
automatic pinging of the kernel until userspace opens the device.
Without this fix, the core will prematurely start kernel-side pinging,
and hanging userspace will never be detected.

Jan

--
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux

\
 
 \ /
  Last update: 2021-07-30 23:38    [W:0.045 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site