lkml.org 
[lkml]   [2021]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/5] Add FF-A support in OP-TEE driver
On Mon, Jul 26, 2021 at 03:59:36PM +0530, Sumit Garg wrote:
> Hi Jens,
>
> On Thu, 22 Jul 2021 at 17:48, Jens Wiklander <jens.wiklander@linaro.org> wrote:
> >
> > Hi all,
> >
> > This adds supports for the OP-TEE driver to communicate with secure world
> > using FF-A [1] as transport.
> >
> > There is one change to the TEE subsystem with "tee: add sec_world_id to
> > struct tee_shm" to add support for holding globally unique handle assigned
> > by the FF-A. This is a field that I believe could useful for the AMDTEE
> > driver too.
> >
> > For communication the OP-TEE message protocol is still used, but with a new
> > type of memory reference, struct optee_msg_param_fmem, to carry the
> > information needed by FF-A. The OP-TEE driver is refactored internally with
> > to sets of callbacks, one for the old SMC based communication and another
> > set with FF-A as transport. The functions relating to the SMC based ABI
> > are moved to smc_abi.c while the FF-A based ABI is added in a ffa_abi.c.
> >
> > There is also a difference in how the drivers are instantiated. With the
> > SMC based transport we have a platform driver, module_platform_driver(),
> > today which we're keeping as is for this configuration. In a FF-A system we
> > have a FF-A driver, module_ffa_driver(), instead.
> >
> > The OP-TEE driver can be compiled for both targets at the same time and
> > it's up to runtime configuration (device tree or ACPI) to decide how it's
> > initialized. Note that it's only the old SMC based driver instance that
> > need device tree or ACPI to initialize. The FF-A based driver relies on the
> > FF-A bus instead.
> >
> > This can be tested QEMU
> > The repo for SPMC at S-EL1 retrieved by
> > repo init -u https://github.com/jenswi-linaro/manifest.git -m
> > qemu_v8.xml -b ffav4_spmc
> > repo sync
> > # Then checkout the branch optee_ffa_v3 from
> > # git://git.linaro.org/people/jens.wiklander/linux-tee.git
> > # in the linux directory
> >
> > To build do:
> > cd build
> > make toolchains
> > make all
> >
> > To boot:
> > make run-only
> >
> > Test with xtest, perhaps only with the command "xtest 1004" in case you're
> > not interested in too many tests.
>
> Thanks Jens for sharing instructions to test this feature. So I tried
> to reproduce using following repo versions:
>
> linux-tee, branch: optee_ffa_v3
> trusted-firmware-a, branch: ffav4_sel1_spmc
> build, branch: ffav4_spmc
>
> and rest of the repos synced to the latest version as per upstream
> qemu_v8.xml [1] but I don't see OP-TEE driver being probed during boot
> [2]. Am I missing something?
>
> [1] https://github.com/OP-TEE/manifest/blob/master/qemu_v8.xml
> [2]
> Welcome to Buildroot, type root or test to login
> buildroot login: root
> # dmesg | grep optee
>

Do you see ARM FF-A driver initialised successfully ?
You must see "ARM FF-A Version 1.0 found" or something similar based on
the actual version supported.

If so, can you check if the partitions are correctly populated by
the driver using the discover API.

$ grep "" /sys/bus/arm_ffa/devices/*/uuid

If uuid reads zeros, then the devices are populated, just the matching
driver is not found(due to the workaround for v1.0 spec)

--
Regards,
Sudeep

\
 
 \ /
  Last update: 2021-07-26 12:56    [W:0.174 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site