lkml.org 
[lkml]   [2021]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] habanalabs: clear msg_to_cpu_reg to avoid misread after reset
Date
From: Koby Elbaz <kelbaz@habana.ai>

For some ASICs, the f/w reads the msg_to_cpu_reg value after
reset, and for some it doesn't.
Therefore, to be sure f/w doesn't read a wrong value after reset, we
need to clear this register before the reset occurs.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/common/firmware_if.c | 28 +++++++++-----------
1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 0be3f5414f0b..c232d197b57a 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -667,17 +667,15 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev,
hdev->event_queue.check_eqe_index = false;

/* Read FW application security bits again */
- if (hdev->asic_prop.fw_cpu_boot_dev_sts0_valid) {
- hdev->asic_prop.fw_app_cpu_boot_dev_sts0 =
- RREG32(sts_boot_dev_sts0_reg);
- if (hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
+ if (prop->fw_cpu_boot_dev_sts0_valid) {
+ prop->fw_app_cpu_boot_dev_sts0 = RREG32(sts_boot_dev_sts0_reg);
+ if (prop->fw_app_cpu_boot_dev_sts0 &
CPU_BOOT_DEV_STS0_EQ_INDEX_EN)
hdev->event_queue.check_eqe_index = true;
}

- if (hdev->asic_prop.fw_cpu_boot_dev_sts1_valid)
- hdev->asic_prop.fw_app_cpu_boot_dev_sts1 =
- RREG32(sts_boot_dev_sts1_reg);
+ if (prop->fw_cpu_boot_dev_sts1_valid)
+ prop->fw_app_cpu_boot_dev_sts1 = RREG32(sts_boot_dev_sts1_reg);

out:
hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev,
@@ -1012,6 +1010,11 @@ void hl_fw_ask_halt_machine_without_linux(struct hl_device *hdev)
} else {
WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_GOTO_WFE);
msleep(static_loader->cpu_reset_wait_msec);
+
+ /* Must clear this register in order to prevent preboot
+ * from reading WFE after reboot
+ */
+ WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_NA);
}

hdev->device_cpu_is_halted = true;
@@ -1242,11 +1245,6 @@ static void hl_fw_preboot_update_state(struct hl_device *hdev)
* b. Check whether hard reset is done by boot cpu
* 3. FW application - a. Fetch fw application security status
* b. Check whether hard reset is done by fw app
- *
- * Preboot:
- * Check security status bit (CPU_BOOT_DEV_STS0_ENABLED). If set, then-
- * check security enabled bit (CPU_BOOT_DEV_STS0_SECURITY_EN)
- * If set, then mark GIC controller to be disabled.
*/
prop->hard_reset_done_by_fw =
!!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_FW_HARD_RST_EN);
@@ -2126,8 +2124,7 @@ static void hl_fw_linux_update_state(struct hl_device *hdev,

/* Read FW application security bits */
if (prop->fw_cpu_boot_dev_sts0_valid) {
- prop->fw_app_cpu_boot_dev_sts0 =
- RREG32(cpu_boot_dev_sts0_reg);
+ prop->fw_app_cpu_boot_dev_sts0 = RREG32(cpu_boot_dev_sts0_reg);

if (prop->fw_app_cpu_boot_dev_sts0 &
CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
@@ -2147,8 +2144,7 @@ static void hl_fw_linux_update_state(struct hl_device *hdev,
}

if (prop->fw_cpu_boot_dev_sts1_valid) {
- prop->fw_app_cpu_boot_dev_sts1 =
- RREG32(cpu_boot_dev_sts1_reg);
+ prop->fw_app_cpu_boot_dev_sts1 = RREG32(cpu_boot_dev_sts1_reg);

dev_dbg(hdev->dev,
"Firmware application CPU status1 %#x\n",
--
2.25.1
\
 
 \ /
  Last update: 2021-07-22 19:34    [W:1.199 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site