lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v3.2 28/29] mmc: Remove duplicate code.
Date
1. core.c : Use tab to replace space.
2. sdhci.c: Remove code which had been moved into sdhci_request_done_dma()

Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
---
drivers/mmc/core/core.c | 2 +-
drivers/mmc/host/sdhci.c | 74 ----------------------------------------
2 files changed, 1 insertion(+), 75 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index d53722c21f29..2624d7b30cd2 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2248,7 +2248,7 @@ void mmc_rescan(struct work_struct *work)
if (mmc_card_sd_express(host)) {
mmc_release_host(host);
goto out;
- }
+ }

if (host->caps & MMC_CAP_UHS2) {
/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5356cd5f4907..ae8e3b5a38bf 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3155,83 +3155,9 @@ bool sdhci_request_done(struct sdhci_host *host)
sdhci_set_mrq_done(host, mrq);
}

- if (data && data->host_cookie == COOKIE_MAPPED) {
- if (host->bounce_buffer) {
- /*
- * On reads, copy the bounced data into the
- * sglist
- */
- if (mmc_get_dma_dir(data) == DMA_FROM_DEVICE) {
- unsigned int length = data->bytes_xfered;
-
- if (length > host->bounce_buffer_size) {
- pr_err("%s: bounce buffer is %u bytes but DMA claims to have transferred %u bytes\n",
- mmc_hostname(host->mmc),
- host->bounce_buffer_size,
- data->bytes_xfered);
- /* Cap it down and continue */
- length = host->bounce_buffer_size;
- }
- dma_sync_single_for_cpu(
- mmc_dev(host->mmc),
- host->bounce_addr,
- host->bounce_buffer_size,
- DMA_FROM_DEVICE);
- sg_copy_from_buffer(data->sg,
- data->sg_len,
- host->bounce_buffer,
- length);
- } else {
- /* No copying, just switch ownership */
- dma_sync_single_for_cpu(
- mmc_dev(host->mmc),
- host->bounce_addr,
- host->bounce_buffer_size,
- mmc_get_dma_dir(data));
- }
- } else {
- /* Unmap the raw data */
- dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len,
- mmc_get_dma_dir(data));
- }
- data->host_cookie = COOKIE_UNMAPPED;
- }
-
sdhci_request_done_dma(host, mrq);
}

- /*
- * The controller needs a reset of internal state machines
- * upon error conditions.
- */
- if (sdhci_needs_reset(host, mrq)) {
- /*
- * Do not finish until command and data lines are available for
- * reset. Note there can only be one other mrq, so it cannot
- * also be in mrqs_done, otherwise host->cmd and host->data_cmd
- * would both be null.
- */
- if (host->cmd || host->data_cmd) {
- spin_unlock_irqrestore(&host->lock, flags);
- return true;
- }
-
- /* Some controllers need this kick or reset won't work here */
- if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
- /* This is to force an update */
- host->ops->set_clock(host, host->clock);
-
- /*
- * Spec says we should do both at the same time, but
- * Ricoh controllers do not like that.
- */
- sdhci_do_reset(host, SDHCI_RESET_CMD);
- sdhci_do_reset(host, SDHCI_RESET_DATA);
-
- host->pending_reset = false;
- }
-
host->mrqs_done[i] = NULL;

spin_unlock_irqrestore(&host->lock, flags);
--
2.32.0
\
 
 \ /
  Last update: 2021-07-22 06:10    [W:0.089 / U:1.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site