lkml.org 
[lkml]   [2021]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 00/26] userfaultfd-wp: Support shmem and hugetlbfs
Date
On 15.07.21 22:13, Peter Xu wrote:
> This is v5 of uffd-wp shmem & hugetlbfs support, which completes uffd-wp as a
> full feature. It's based on v5.14-rc1.
>
> I reposted the whole series majorly to trigger the syzbot tests again; sorry if
> it brings a bit of noise. Please let me know if there's easier way to trigger
> the syzbot test instead of reposting the whole series.
>
> Meanwhile, recently discussion around soft-dirty shows that soft-dirty may have
> similar requirement as uffd-wp on persisting the dirty information:
>
> https://lore.kernel.org/lkml/20210714152426.216217-1-tiberiu.georgescu@nutanix.com/
>
> Then the mechanism provided in this patchset may be suitable for soft-dirty too.
>
> The whole series can also be found online [1].
>
> v5 changelog:
> - Fix two issues spotted by syzbot
> - Compile test with (1) !USERFAULTFD, (2) USERFAULTFD && !USERFAULTFD_WP
>
> Previous versions:
>
> RFC: https://lore.kernel.org/lkml/20210115170907.24498-1-peterx@redhat.com/
> v1: https://lore.kernel.org/lkml/20210323004912.35132-1-peterx@redhat.com/
> v2: https://lore.kernel.org/lkml/20210427161317.50682-1-peterx@redhat.com/
> v3: https://lore.kernel.org/lkml/20210527201927.29586-1-peterx@redhat.com/
> v4: https://lore.kernel.org/lkml/20210714222117.47648-1-peterx@redhat.com/
>
> About Swap Special PTE
> ======================
>
> In short, the so-called "swap special pte" in this patchset is a new type of
> pte that doesn't exist in the past, but it got used initially in this series in
> file-backed memories. It is used to persist information even if the ptes got
> dropped meanwhile when the page cache still existed. For example, when
> splitting a file-backed huge pmd, we could be simply dropping the pmd entry
> then wait until another fault coming. It's okay in the past since all
> information in the pte can be retained from the page cache when the next page
> fault triggers. However in this case, uffd-wp is per-pte information which
> cannot be kept in page cache, so that information needs to be maintained
> somehow still in the pgtable entry, even if the pgtable entry is going to be
> dropped. Here instead of replacing with a none entry, we used the "swap
> special pte". Then when the next page fault triggers, we can observe orig_pte
> to retain this information.
>
> I'm copy-pasting some commit message from the patch "mm/swap: Introduce the
> idea of special swap ptes", where it tried to explain this pte in another angle:
>
> We used to have special swap entries, like migration entries, hw-poison
> entries, device private entries, etc.
>
> Those "special swap entries" reside in the range that they need to be at least
> swap entries first, and their types are decided by swp_type(entry).
>
> This patch introduces another idea called "special swap ptes".
>
> It's very easy to get confused against "special swap entries", but a speical
> swap pte should never contain a swap entry at all. It means, it's illegal to
> call pte_to_swp_entry() upon a special swap pte.
>
> Make the uffd-wp special pte to be the first special swap pte.
>
> Before this patch, is_swap_pte()==true means one of the below:
>
> (a.1) The pte has a normal swap entry (non_swap_entry()==false). For
> example, when an anonymous page got swapped out.
>
> (a.2) The pte has a special swap entry (non_swap_entry()==true). For
> example, a migration entry, a hw-poison entry, etc.
>
> After this patch, is_swap_pte()==true means one of the below, where case (b) is
> added:
>
> (a) The pte contains a swap entry.
>
> (a.1) The pte has a normal swap entry (non_swap_entry()==false). For
> example, when an anonymous page got swapped out.
>
> (a.2) The pte has a special swap entry (non_swap_entry()==true). For
> example, a migration entry, a hw-poison entry, etc.
>
> (b) The pte does not contain a swap entry at all (so it cannot be passed
> into pte_to_swp_entry()). For example, uffd-wp special swap pte.
>
> Hugetlbfs needs similar thing because it's also file-backed. I directly reused
> the same special pte there, though the shmem/hugetlb change on supporting this
> new pte is different since they don't share code path a lot.
>
> Patch layout
> ============
>
> Part (1): Shmem support, this is where the special swap pte is introduced.
> Some zap rework is needed within the process:
>
> mm/shmem: Unconditionally set pte dirty in mfill_atomic_install_pte
> shmem/userfaultfd: Take care of UFFDIO_COPY_MODE_WP
> mm: Clear vmf->pte after pte_unmap_same() returns
> mm/userfaultfd: Introduce special pte for unmapped file-backed mem
> mm/swap: Introduce the idea of special swap ptes
> shmem/userfaultfd: Handle uffd-wp special pte in page fault handler
> mm: Drop first_index/last_index in zap_details
> mm: Introduce zap_details.zap_flags
> mm: Introduce ZAP_FLAG_SKIP_SWAP
> shmem/userfaultfd: Persist uffd-wp bit across zapping for file-backed
> shmem/userfaultfd: Allow wr-protect none pte for file-backed mem
> shmem/userfaultfd: Allows file-back mem to be uffd wr-protected on thps
> shmem/userfaultfd: Handle the left-overed special swap ptes
> shmem/userfaultfd: Pass over uffd-wp special swap pte when fork()
>
> Part (2): Hugetlb supportdisable huge pmd sharing for uffd-wp patches have been
> merged. The rest is the changes required to teach hugetlbfs understand the
> special swap pte too that introduced with the uffd-wp change:
>
> mm/hugetlb: Drop __unmap_hugepage_range definition from hugetlb.h
> mm/hugetlb: Introduce huge pte version of uffd-wp helpers
> hugetlb/userfaultfd: Hook page faults for uffd write protection
> hugetlb/userfaultfd: Take care of UFFDIO_COPY_MODE_WP
> hugetlb/userfaultfd: Handle UFFDIO_WRITEPROTECT
> mm/hugetlb: Introduce huge version of special swap pte helpers
> hugetlb/userfaultfd: Handle uffd-wp special pte in hugetlb pf handler
> hugetlb/userfaultfd: Allow wr-protect none ptes
> hugetlb/userfaultfd: Only drop uffd-wp special pte if required
>
> Part (3): Enable both features in code and test (plus pagemap support)
>
> mm/pagemap: Recognize uffd-wp bit for shmem/hugetlbfs
> userfaultfd: Enable write protection for shmem & hugetlbfs
> userfaultfd/selftests: Enable uffd-wp for shmem/hugetlbfs
>
> Tests
> =====
>
> I've tested it using either userfaultfd kselftest program, but also with
> umapsort [2] which should be even stricter. Tested page swapping in/out during
> umapsort.
>
> If anyone would like to try umapsort, need to use an extremely hacked version
> of umap library [3], because by default umap only supports anonymous. So to
> test it we need to build [3] then [2].
>
> Any comment would be greatly welcomed. Thanks,

Hi Peter,

I just stumbled over copy_page_range() optimization

/*
* Don't copy ptes where a page fault will fill them correctly.
* Fork becomes much lighter when there are big shared or private
* readonly mappings. The tradeoff is that copy_page_range is more
* efficient than faulting.
*/
if (!(src_vma->vm_flags & (VM_HUGETLB | VM_PFNMAP | VM_MIXEDMAP)) &&
!src_vma->anon_vma)
return 0;

IIUC, that means you'll not copy the WP bits for shmem and,
therefore, lose them during fork.

--
Thanks,

David / dhildenb

\
 
 \ /
  Last update: 2021-07-19 21:59    [W:1.355 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site