lkml.org 
[lkml]   [2021]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] gpiolib: convert 'devprop_gpiochip_set_names' to support multiple gpiochip baks per device
Hi Sergio,

On Thu, Jul 08, 2021 at 09:04:27AM +0200, Sergio Paracuellos wrote:
> The default gpiolib-of implementation does not work with the multiple
> gpiochip banks per device structure used for example by the gpio-mt7621
> and gpio-brcmstb drivers. To fix these kind of situations driver code
> is forced to fill the names to avoid the gpiolib code to set names
> repeated along the banks. Instead of continue with that antipattern
> fix the gpiolib core function to get expected behaviour for every
> single situation adding a field 'offset' in the gpiochip structure.
> Doing in this way, we can assume this offset will be zero for normal
> driver code where only one gpiochip bank per device is used but
> can be set explicitly in those drivers that really need more than
> one gpiochip.

This is a nice improvement, thanks for putting this together! A few
remarks below:

>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> ---
> drivers/gpio/gpiolib.c | 34 ++++++++++++++++++++++++++++------
> include/linux/gpio/driver.h | 4 ++++
> 2 files changed, 32 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 27c07108496d..f3f45b804542 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -382,11 +382,16 @@ static int devprop_gpiochip_set_names(struct gpio_chip *chip)
> if (count < 0)
> return 0;
>
> - if (count > gdev->ngpio) {
> - dev_warn(&gdev->dev, "gpio-line-names is length %d but should be at most length %d",
> - count, gdev->ngpio);
> - count = gdev->ngpio;
> - }
> + /*
> + * When offset is set in the driver side we assume the driver internally
> + * is using more than one gpiochip per the same device. We have to stop
> + * setting friendly names if the specified ones with 'gpio-line-names'
> + * are less than the offset in the device itself. This means all the
> + * lines are not present for every single pin within all the internal
> + * gpiochips.
> + */
> + if (count <= chip->offset)
> + return 0;

This case needs a descriptive warning message. Silent failure to assign
names here will leave someone confused about what they're doing wrong.

>
> names = kcalloc(count, sizeof(*names), GFP_KERNEL);
> if (!names)
> @@ -400,8 +405,25 @@ static int devprop_gpiochip_set_names(struct gpio_chip *chip)
> return ret;
> }
>
> + /*
> + * When more that one gpiochip per device is used, 'count' can
> + * contain at most number gpiochips x chip->ngpio. We have to
> + * correctly distribute all defined lines taking into account
> + * chip->offset as starting point from where we will assign
> + * the names to pins from the 'names' array. Since property
> + * 'gpio-line-names' cannot contains gaps, we have to be sure
> + * we only assign those pins that really exists since chip->ngpio
> + * can be different of the chip->offset.
> + */
> + count = (count > chip->offset) ? count - chip->offset : count;
> + if (count > chip->ngpio) {

In the multiple gpiochip case, if there are 3+ gpiochips this seems like
it will yield an invalid warning. For example, if there are 3 gpiochips
(banks 0, 1, and 2), and all gpios are given names in gpio-line-names,
isn't this condition going to always evaluate to true for bank 1,
resulting in an invalid warning? In that case I would think setting
count to chip->ngpio is the *expected* behavior.

Since that's a "normal" behavior in the multiple gpiochip case, I'm not
sure there's a simple way to detect an over-long gpio-line-names here
in this function anymore.

> + dev_warn(&gdev->dev, "gpio-line-names is length %d but
> should be at most length %d", + count,
> chip->ngpio);
> + count = chip->ngpio; + } + for (i = 0; i < count; i++)
> - gdev->descs[i].name = names[i]; +
> gdev->descs[i].name = names[chip->offset + i];
>
> kfree(names);
>
> [snip]

Best regards,
Gregory

\
 
 \ /
  Last update: 2021-07-19 09:58    [W:0.081 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site