lkml.org 
[lkml]   [2021]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC 06/10] arm64/mm: Add FEAT_LPA2 specific encoding
Date
On 7/16/21 3:32 PM, Steven Price wrote:
> On 16/07/2021 08:20, Anshuman Khandual wrote:
>>
>>
>> On 7/14/21 9:08 PM, Steven Price wrote:
>>> On 14/07/2021 03:21, Anshuman Khandual wrote:
>>>> FEAT_LPA2 requires different PTE representation formats for both 4K and 16K
>>>> page size config. This adds FEAT_LPA2 specific new PTE encodings as per ARM
>>>> ARM (0487G.A) which updates [pte|phys]_to_[phys|pte](). The updated helpers
>>>> would be used when FEAT_LPA2 gets enabled via CONFIG_ARM64_PA_BITS_52 on 4K
>>>> and 16K page size. Although TTBR encoding and phys_to_ttbr() helper remains
>>>> the same as FEAT_LPA for FEAT_LPA2 as well. It updates 'phys_to_pte' helper
>>>> to accept a temporary variable and changes impacted call sites.
>>>>
>>>> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
>>>> ---
>>>> arch/arm64/include/asm/assembler.h | 23 +++++++++++++++++++----
>>>> arch/arm64/include/asm/pgtable-hwdef.h | 4 ++++
>>>> arch/arm64/include/asm/pgtable.h | 4 ++++
>>>> arch/arm64/kernel/head.S | 25 +++++++++++++------------
>>>> 4 files changed, 40 insertions(+), 16 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
>>>> index fedc202..0492543 100644
>>>> --- a/arch/arm64/include/asm/assembler.h
>>>> +++ b/arch/arm64/include/asm/assembler.h
>>>> @@ -606,7 +606,7 @@ alternative_endif
>>>> #endif
>>>> .endm
>>>>
>>>> - .macro phys_to_pte, pte, phys
>>>> + .macro phys_to_pte, pte, phys, tmp
>>>> #ifdef CONFIG_ARM64_PA_BITS_52_LPA
>>>> /*
>>>> * We assume \phys is 64K aligned and this is guaranteed by only
>>>> @@ -614,6 +614,17 @@ alternative_endif
>>>> */
>>>> orr \pte, \phys, \phys, lsr #36
>>>> and \pte, \pte, #PTE_ADDR_MASK
>>>> +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2)
>>>> + orr \pte, \phys, \phys, lsr #42
>>>> +
>>>> + /*
>>>> + * The 'tmp' is being used here to just prepare
>>>> + * and hold PTE_ADDR_MASK which cannot be passed
>>>> + * to the subsequent 'and' instruction.
>>>> + */
>>>> + mov \tmp, #PTE_ADDR_LOW
>>>> + orr \tmp, \tmp, #PTE_ADDR_HIGH
>>>> + and \pte, \pte, \tmp
>>> Rather than adding an extra temporary register (and the fallout of
>>> various other macros needing an extra register), this can be done with
>>> two AND instructions:
>>
>> I would really like to get rid of the 'tmp' variable here as
>> well but did not figure out any method of accomplishing it.
>>
>>>
>>> /* PTE_ADDR_MASK cannot be encoded as an immediate, so
>>> * mask off all but two bits, followed by masking the
>>> * extra two bits
>>> */
>>> and \pte, \pte, #PTE_ADDR_MASK | (3 << 10)
>>> and \pte, \pte, #~(3 << 10)
>>
>> Did this change as suggested
>>
>> --- a/arch/arm64/include/asm/assembler.h
>> +++ b/arch/arm64/include/asm/assembler.h
>> @@ -626,9 +626,8 @@ alternative_endif
>> * and hold PTE_ADDR_MASK which cannot be passed
>> * to the subsequent 'and' instruction.
>> */
>> - mov \tmp, #PTE_ADDR_LOW
>> - orr \tmp, \tmp, #PTE_ADDR_HIGH
>> - and \pte, \pte, \tmp
>> + and \pte, \pte, #PTE_ADDR_MASK | (0x3 << 10)
>> + and \pte, \pte, #~(0x3 << 10)
>>
>> .Lskip_lpa2\@:
>> mov \pte, \phys
>>
>>
>> but still fails to build (tested on 16K)
>>
>> arch/arm64/kernel/head.S: Assembler messages:
>> arch/arm64/kernel/head.S:377: Error: immediate out of range at operand 3 -- `and x6,x6,#((((1<<(50-14))-1)<<14)|(0x3<<8))|(0x3<<10)'
>> arch/arm64/kernel/head.S:390: Error: immediate out of range at operand 3 -- `and x12,x12,#((((1<<(50-14))-1)<<14)|(0x3<<8))|(0x3<<10)'
>> arch/arm64/kernel/head.S:390: Error: immediate out of range at operand 3 -- `and x12,x12,#((((1<<(50-14))-1)<<14)|(0x3<<8))|(0x3<<10)'
>> arch/arm64/kernel/head.S:404: Error: immediate out of range at operand 3 -- `and x12,x12,#((((1<<(50-14))-1)<<14)|(0x3<<8))|(0x3<<10)'
>> arch/arm64/kernel/head.S:404: Error: immediate out of range at operand 3 -- `and x12,x12,#((((1<<(50-14))-1)<<14)|(0x3<<8))|(0x3<<10)'
>>
>
> Ah, I'd only tested this for 4k. 16k would require a different set of masks.
>
> So the bits we need to cover are those from just below PAGE_SHIFT to the
> top of PTE_ADDR_HIGH (bit 10). So we can compute the mask for both 4k

Okay.

> and 16k with GENMASK(PAGE_SHIFT-1, 10):
>
> and \pte, \pte, #PTE_ADDR_MASK | GENMASK(PAGE_SHIFT - 1, 10)
> and \pte, \pte, #~GENMASK(PAGE_SHIFT - 1, 10)
>
> This compiles (for both 4k and 16k) and the assembly looks correct, but
> I've not done any other testing.

Yeah it works, will do the change.

\
 
 \ /
  Last update: 2021-07-16 16:37    [W:0.702 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site