Messages in this thread | | | From | Anand Moon <> | Subject | [PATCHv2 0/4] Meson-8b and Meson-gxbb Fix some missing code | Date | Fri, 16 Jul 2021 10:36:32 +0000 |
| |
On Odroid C1+ and Odroid C2 USB feature is broken
It's being observed the after initiation of USB phy the USB port goes in to suspend state, If we pass usbcore.autosuspend=-1 via command line USB hotplug seen to be working.
Another issue I observed is increase of USB interrupts event even if there is not much activity on USB ports.
$ cat /proc/interrupts | grep usb 35: 26462800 0 0 0 GIC-0 63 Level c90c0000.usb, dwc2_hsotg:usb1
Changes added power node to usb phy and small code cleanup in usb phy.
Previous version RFC. [0] https://patchwork.kernel.org/project/linux-amlogic/cover/20210617194154.2397-1-linux.amoon@gmail.com/ Dopped the reoder of code changes as of now.
V1 > changes Fixed the GPIO input signal on Odroid C1+/C2 New patch added to fix Odroid C2.
Thanks -Anand
Anand Moon (4): ARM: dts: meson8b: odroidc1: Add usb phy power node arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
arch/arm/boot/dts/meson8b-odroidc1.dts | 19 +++++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++---- drivers/phy/amlogic/phy-meson8b-usb2.c | 8 ++++++-- 3 files changed, 28 insertions(+), 6 deletions(-)
-- 2.32.0
| |