lkml.org 
[lkml]   [2021]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: dw_mmc: Fix hang on data CRC error
From
Date
On 7/14/21 8:49 PM, Vincent Whitchurch wrote:
> On Thu, Jul 01, 2021 at 12:06:31AM +0200, Jaehoon Chung wrote:
>> On 6/30/21 7:22 PM, Vincent Whitchurch wrote:
>>> When a Data CRC interrupt is received, the driver disables the DMA, then
>>> sends the stop/abort command and then waits for Data Transfer Over.
>>>
>>> However, sometimes, when a data CRC error is received in the middle of a
>>> multi-block write transfer, the Data Transfer Over interrupt is never
>>> received, and the driver hangs and never completes the request.
>>>
>>> The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the
>>> DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed
>>> "before assertion of SWR". Do these operations in the recommended
>>> order. With this change the Data Transfer Over is always received
>>> correctly in my tests.
>>
>> I will check with your patch. I didn't see any CRC error on my targets before.
>
> Have you had a chance to check it? You can use the fault-injection
> patch if you want to trigger aborted transfers without getting real CRC
> errors:
>
> https://protect2.fireeye.com/v1/url?k=96c33914-c958001f-96c2b25b-002590f5b904-9a89d187f33934b7&q=1&e=308eae3a-44b8-43d7-be54-24e9b850f4ad&u=https%3A%2F%2Flore.kernel.org%2Flinux-mmc%2F20210701080534.23138-1-vincent.whitchurch%40axis.com%2F
>

\
 
 \ /
  Last update: 2021-07-14 23:46    [W:0.065 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site