lkml.org 
[lkml]   [2021]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: fix node name for the sysclk
On Tue, Jun 08, 2021 at 02:26:58PM +0300, Vladimir Oltean wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> U-Boot attempts to fix up the "clock-frequency" property of the "/sysclk" node:
> https://elixir.bootlin.com/u-boot/v2021.04/source/arch/arm/cpu/armv8/fsl-layerscape/fdt.c#L512
>
> but fails to do so:
>
> ## Booting kernel from Legacy Image at a1000000 ...
> Image Name:
> Created: 2021-06-08 10:31:38 UTC
> Image Type: AArch64 Linux Kernel Image (gzip compressed)
> Data Size: 15431370 Bytes = 14.7 MiB
> Load Address: 80080000
> Entry Point: 80080000
> Verifying Checksum ... OK
> ## Flattened Device Tree blob at a0000000
> Booting using the fdt blob at 0xa0000000
> Uncompressing Kernel Image
> Loading Device Tree to 00000000fbb19000, end 00000000fbb22717 ... OK
> Unable to update property /sysclk:clock-frequency, err=FDT_ERR_NOTFOUND
>
> Starting kernel ...
>
> All Layerscape SoCs except LS1028A use "sysclk" as the node name, and
> not "clock-sysclk". So change the node name of LS1028A accordingly.
>
> Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Applied, thanks.

\
 
 \ /
  Last update: 2021-07-14 04:31    [W:0.044 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site