lkml.org 
[lkml]   [2021]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/3] Add SSIF BMC driver
From
Date
On 14/07/2021 07:17, Corey Minyard wrote:
> On Wed, Jul 14, 2021 at 06:29:27AM +0700, Quan Nguyen wrote:
>> On 13/07/2021 22:44, Corey Minyard wrote:
>>> On Tue, Jul 13, 2021 at 12:54:22PM +0700, Quan Nguyen wrote:
>>>> This series add support the SSIF BMC driver which is to perform in-band
>>>> IPMI communication with their host in management (BMC) side.
>>>
>>> Per the kernel build robot, looks like patch 3 introduces slave_enable()
>>> but patch 1 uses it.
>>>
>>> -corey
>>>
>> Thanks Corey,
>>
>> The order is not correct and kernel build robot found this hurts
>> bisectibility.
>> The patch 3 should be the first patch.
>
> Ok, can you re-submit in the right order?
>
> Thanks,
>
> -corey
>
Yes, I will re-submit new series with right order soon.

>>
>> - Quan
>>
>>>>
>>>> SSIF BMC driver in this series is tested with Aspeed AST2500.
>>>>
>>>> v4:
>>>> + Fix recursive spinlock [Graeme]
>>>> + Send response with Completion code 0xFF when aborting [Quan]
>>>> + Fix warning with dt_binding_check [Rob]
>>>> + Change aspeed-ssif-bmc.yaml to ssif-bmc.yaml [Quan]
>>>> + Added bounding check on SMBus writes and the whole request [Dan]
>>>> + Moved buffer to end of struct ssif_bmc_ctx to avoid context
>>>> corruption if somehow buffer is written past the end [Dan]
>>>> + Return -EINVAL if userspace buffer too small, dont
>>>> silence truncate [Corey, Joel]
>>>> + Not necessary to check NONBLOCK in lock [Corey]
>>>> + Enforce one user at a time [Joel]
>>>> + Reject write with invalid response length from userspace [Corey]
>>>> + Add state machines for better ssif bmc state handling [Quan]
>>>> + Drop ssif_bmc_aspeed.c and make ssif_bmc.c is generic
>>>> SSIF BMC driver [Quan]
>>>> + Change compatible string "aspeed,ast2500-ssif-bmc" to
>>>> "ampere,ssif-bmc" [Quan]
>>>> + Toggle Slave enable in i2c-aspeed to turn on/off slave mode [Ryan]
>>>> + Added slave_enable() to struct i2c_algorithm to control
>>>> slave mode and to address the recursive spinlock [Graeme, Ryan]
>>>> + Abort current request with invalid SMBus write or
>>>> invalid command [Quan]
>>>> + Abort all request if there is pending response [Quan]
>>>> + Changed validate_pec() to validate_request() [Quan]
>>>> + Add unsupported_smbus_cmd() to handle unknown SMBus command [Quan]
>>>> + Print internal state string for ease investigating issue [Quan]
>>>> + Move to READY state on SLAVE_STOP event [Quan]
>>>> + Change initilize_transfer() to process_smbus_cmd() [Quan]
>>>> + Introduce functions for each slave event [Quan]
>>>>
>>>> v3:
>>>> + Switched binding doc to use DT schema format [Rob]
>>>> + Splited into generic ssif_bmc and aspeed-specific [Corey, Joel]
>>>> + Removed redundant license info [Joel]
>>>> + Switched to use traditional if-else [Joel]
>>>> + Removed unused ssif_bmc_ioctl() [Joel]
>>>> + Made handle_request()/complete_response() to return void [Joel]
>>>> + Refactored send_ssif_bmc_response()/receive_ssif_bmc_request()
>>>> [Corey]
>>>> + Remove mutex [Corey]
>>>> + Use spin_lock/unlock_irqsave/restore in callback [Corey]
>>>> + Removed the unnecessary memset [Corey]
>>>> + Switch to use dev_err() [Corey]
>>>> + Combine mask/unmask two interrupts together [Corey]
>>>> + Fixed unhandled Tx done with NAK [Quan]
>>>> + Late ack'ed Tx done w/wo Ack irq [Quan]
>>>> + Use aspeed-specific exported aspeed_set_slave_busy() when slave busy
>>>> to fix the deadlock [Graeme, Philipp, Quan]
>>>> + Clean buffer for last multipart read [Quan]
>>>> + Handle unknown incoming command [Quan]
>>>>
>>>> v2:
>>>> + Fixed compiling error with COMPILE_TEST for arc
>>>>
>>>> Quan Nguyen (3):
>>>> ipmi: ssif_bmc: Add SSIF BMC driver
>>>> bindings: ipmi: Add binding for SSIF BMC driver
>>>> i2c: aspeed: Add slave_enable() to toggle slave mode
>>>>
>>>> .../devicetree/bindings/ipmi/ssif-bmc.yaml | 38 +
>>>> drivers/char/ipmi/Kconfig | 11 +
>>>> drivers/char/ipmi/Makefile | 1 +
>>>> drivers/char/ipmi/ssif_bmc.c | 781 ++++++++++++++++++
>>>> drivers/char/ipmi/ssif_bmc.h | 106 +++
>>>> drivers/i2c/busses/i2c-aspeed.c | 20 +
>>>> include/linux/i2c.h | 2 +
>>>> 7 files changed, 959 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml
>>>> create mode 100644 drivers/char/ipmi/ssif_bmc.c
>>>> create mode 100644 drivers/char/ipmi/ssif_bmc.h
>>>>
>>>> --
>>>> 2.28.0
>>>>
>>

\
 
 \ /
  Last update: 2021-07-14 02:21    [W:0.059 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site