lkml.org 
[lkml]   [2021]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH v2 46/46] KVM: x86: Preserve guest's CR0.CD/NW on INIT
From
Preserve CR0.CD and CR0.NW on INIT instead of forcing them to '1', as
defined by both Intel's SDM and AMD's APM.

Note, current versions of Intel's SDM are very poorly written with
respect to INIT behavior. Table 9-1. "IA-32 and Intel 64 Processor
States Following Power-up, Reset, or INIT" quite clearly lists power-up,
RESET, _and_ INIT as setting CR0=60000010H, i.e. CD/NW=1. But the SDM
then attempts to qualify CD/NW behavior in a footnote:

2. The CD and NW flags are unchanged, bit 4 is set to 1, all other bits
are cleared.

Presumably that footnote is only meant for INIT, as the RESET case and
especially the power-up case are rather non-sensical. Another footnote
all but confirms that:

6. Internal caches are invalid after power-up and RESET, but left
unchanged with an INIT.

Bare metal testing shows that CD/NW are indeed preserved on INIT (someone
else can hack their BIOS to check RESET and power-up :-D).

Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/x86.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f35dd8192c32..3f0226259496 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -10787,6 +10787,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
{
unsigned long old_cr0 = kvm_read_cr0(vcpu);
+ unsigned long new_cr0;
u32 eax, dummy;

kvm_lapic_reset(vcpu, init_event);
@@ -10873,7 +10874,18 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
kvm_set_rflags(vcpu, X86_EFLAGS_FIXED);
kvm_rip_write(vcpu, 0xfff0);

- static_call(kvm_x86_set_cr0)(vcpu, X86_CR0_NW | X86_CR0_CD | X86_CR0_ET);
+ /*
+ * CR0.CD/NW are set on RESET, preserved on INIT. Note, some versions
+ * of Intel's SDM list CD/NW as being set on INIT, but they contradict
+ * (or qualify) that with a footnote stating that CD/NW are preserved.
+ */
+ new_cr0 = X86_CR0_ET;
+ if (init_event)
+ new_cr0 |= (old_cr0 & (X86_CR0_NW | X86_CR0_CD));
+ else
+ new_cr0 |= X86_CR0_NW | X86_CR0_CD;
+
+ static_call(kvm_x86_set_cr0)(vcpu, new_cr0);
static_call(kvm_x86_set_cr4)(vcpu, 0);
static_call(kvm_x86_set_efer)(vcpu, 0);
static_call(kvm_x86_update_exception_bitmap)(vcpu);
--
2.32.0.93.g670b81a890-goog
\
 
 \ /
  Last update: 2021-07-13 18:39    [W:0.220 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site