lkml.org 
[lkml]   [2021]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
Hi Rob,

Thank you for the review.

On Thu, Jul 1, 2021 at 9:21 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, Jun 29, 2021 at 11:03:27PM +0100, Lad Prabhakar wrote:
> > Add binding documentation for Renesas RZ/G2L A/D converter block.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> > .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 121 ++++++++++++++++++
> > 1 file changed, 121 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> > new file mode 100644
> > index 000000000000..db935d6d59eb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> > @@ -0,0 +1,121 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/renesas,rzg2l-adc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L ADC
> > +
> > +maintainers:
> > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description: |
> > + A/D Converter block is a successive approximation analog-to-digital converter
> > + with a 12-bit accuracy. Up to eight analog input channels can be selected.
> > + Conversions can be performed in single or repeat mode. Result of the ADC is
> > + stored in a 32-bit data register corresponding to each channel.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
>
> You can drop oneOf here.
>
Dropping oneOf from here dt_binding_check complains with below report,
Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml:
properties:compatible: [{'items': [{'enum':
['renesas,r9a07g044-adc']}, {'const': 'renesas,rzg2l-adc'}]}] is not
of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#

> > + - items:
> > + - enum:
> > + - renesas,r9a07g044-adc # RZ/G2{L,LC}
> > + - const: renesas,rzg2l-adc
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: converter clock
> > + - description: peripheral clock
> > +
> > + clock-names:
> > + items:
> > + - const: adclk
> > + - const: pclk
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + maxItems: 2
> > +
> > + reset-names:
> > + items:
> > + - const: presetn
> > + - const: adrst-n
> > +
> > + renesas-rzg2l,adc-trigger-mode:
> > + $ref: /schemas/types.yaml#/definitions/uint8
> > + description: Trigger mode for A/D converter
> > + enum:
> > + - 0 # Software trigger mode (Defaults)
> > + - 1 # Asynchronous trigger using ADC_TRG trigger input pin
> > + - 2 # Synchronous trigger (Trigger from MTU3a/GPT)
> > + default: 0
> > +
> > + gpios:
>
> A named gpio is preferred. trigger-gpios?
>
Agreed.

Cheers,
Prabhakar

> > + description:
> > + ADC_TRG trigger input pin
> > + maxItems: 1
> > +
> > + renesas-rzg2l,adc-channels:
> > + $ref: /schemas/types.yaml#/definitions/uint8-array
> > + description: Input channels available on platform
> > + uniqueItems: true
> > + minItems: 1
> > + maxItems: 8
> > + items:
> > + enum: [0, 1, 2, 3, 4, 5, 6, 7]
> > +
> > + "#io-channel-cells":
> > + const: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - power-domains
> > + - resets
> > + - reset-names
> > + - renesas-rzg2l,adc-channels
> > + - "#io-channel-cells"
> > +
> > +allOf:
> > + - if:
> > + properties:
> > + renesas-rzg2l,adc-trigger-mode:
> > + const: 1
> > + then:
> > + required:
> > + - gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + adc: adc@10059000 {
> > + compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
> > + reg = <0x10059000 0x400>;
> > + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
> > + clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
> > + <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
> > + clock-names = "adclk", "pclk";
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_ADC_PRESETN>,
> > + <&cpg R9A07G044_ADC_ADRST_N>;
> > + reset-names = "presetn", "adrst-n";
> > + #io-channel-cells = <1>;
> > + renesas-rzg2l,adc-trigger-mode = /bits/ 8 <0>;
> > + renesas-rzg2l,adc-channels = /bits/ 8 <0 1 2 3 4 5 6>;
> > + };
> > --
> > 2.17.1
> >
> >

\
 
 \ /
  Last update: 2021-07-13 18:01    [W:1.536 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site