lkml.org 
[lkml]   [2021]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v4 0/2] Add the driver for Intel Keem Bay SoC timer block
Date
Gentle Reminder!

Regards,
Shruthi

> -----Original Message-----
> From: Sanil, Shruthi <shruthi.sanil@intel.com>
> Sent: Monday, June 28, 2021 11:44 AM
> To: daniel.lezcano@linaro.org; tglx@linutronix.de; robh+dt@kernel.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Cc: andriy.shevchenko@linux.intel.com; kris.pan@linux.intel.com;
> mgross@linux.intel.com; Thokala, Srikanth <srikanth.thokala@intel.com>;
> Raja Subramanian, Lakshmi Bai <lakshmi.bai.raja.subramanian@intel.com>;
> Sangannavar, Mallikarjunappa <mallikarjunappa.sangannavar@intel.com>;
> Sanil, Shruthi <shruthi.sanil@intel.com>
> Subject: [PATCH v4 0/2] Add the driver for Intel Keem Bay SoC timer block
>
> From: Shruthi Sanil <shruthi.sanil@intel.com>
>
> The timer block supports 1 64-bit free running counter and 8 32-bit general
> purpose timers.
>
> Patch 1 holds the device tree binding documentation.
> Patch 2 holds the device driver.
>
> This driver is tested on the Keem Bay evaluation module board.
>
> Changes since v3:
> - Update in KConfig file to support COMPILE_TEST for Keem Bay timer.
> - Update in device tree bindings to remove status field.
> - Update in device tree bindings to remove 64-bit address space for
> the child nodes by using non-empty ranges.
>
> Changes since v2:
> - Add multi timer support.
> - Update in the device tree binding to support multi timers.
> - Code optimization.
>
> Changes since v1:
> - Add support for KEEMBAY_TIMER to get selected through
> Kconfig.platforms.
> - Add CLOCK_EVT_FEAT_DYNIRQ as part of clockevent feature.
> - Avoid overlapping reg regions across 2 device nodes.
> - Simplify 2 device nodes as 1 because both are from same IP block.
> - Adapt the driver code according to the new simplified devicetree.
>
> Shruthi Sanil (2):
> dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer
> clocksource: Add Intel Keem Bay timer support
>
> .../bindings/timer/intel,keembay-timer.yaml | 170 ++++++++++++
> MAINTAINERS | 5 +
> drivers/clocksource/Kconfig | 11 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-keembay.c | 255 ++++++++++++++++++
> 5 files changed, 442 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
> create mode 100644 drivers/clocksource/timer-keembay.c
>
>
> base-commit: 62fb9874f5da54fdb243003b386128037319b219
> --
> 2.17.1

\
 
 \ /
  Last update: 2021-07-13 07:09    [W:0.080 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site