lkml.org 
[lkml]   [2021]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: display/panel: Add Innolux EJ030NA
Hi Sam, thanks for the review.

Le sam., juil. 10 2021 at 08:14:43 +0200, Sam Ravnborg
<sam@ravnborg.org> a écrit :
> Hi Paul,
>
> On Fri, Jun 25, 2021 at 01:10:44PM +0100, Paul Cercueil wrote:
>> Add binding for the Innolux EJ030NA panel, which is a 320x480 3.0"
>> 4:3
>> 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
>> interface.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>> .../display/panel/innolux,ej030na.yaml | 62
>> +++++++++++++++++++
>> 1 file changed, 62 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
>>
>> diff --git
>> a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
>> b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
>> new file mode 100644
>> index 000000000000..cda36c04e85c
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
>> @@ -0,0 +1,62 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id:
>> http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
>> +
>> +description: |
>> + The panel must obey the rules for a SPI slave device as
>> specified in
>> + spi/spi-controller.yaml
>> +
>> +maintainers:
>> + - Paul Cercueil <paul@crapouillou.net>
>> +
>> +allOf:
>> + - $ref: panel-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: innolux,ej030na
>> +
>> + backlight: true
>> + port: true
>> + power-supply: true
>> + reg: true
>> + reset-gpios: true
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - power-supply
>> + - reset-gpios
>> +
>> +unevaluatedProperties: false
> I had expected:
> additionalProperties: false
>
> With this fixed:
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

I am not sure; the doc states that this (additionalProperties: false)
"can't be used in case where another schema is referenced", which is
the case here, as we include "panel-common.yaml".

Cheers,
-Paul

>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/gpio/gpio.h>
>> +
>> + spi {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + panel@0 {
>> + compatible = "innolux,ej030na";
>> + reg = <0>;
>> +
>> + spi-max-frequency = <10000000>;
>> +
>> + reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
>> + power-supply = <&lcd_power>;
>> +
>> + backlight = <&backlight>;
>> +
>> + port {
>> + panel_input: endpoint {
>> + remote-endpoint = <&panel_output>;
>> + };
>> + };
>> + };
>> + };
>> --
>> 2.30.2


\
 
 \ /
  Last update: 2021-07-10 11:44    [W:0.058 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site