lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On sm8250 dispcc requires MMCX power domain to be powered up before
> clock controller's registers become available. For now sm8250 was using
> external regulator driven by the power domain to describe this
> relationship. Switch into specifying power-domain and required opp-state
> directly.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> .../bindings/clock/qcom,dispcc-sm8x50.yaml | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> index 0cdf53f41f84..48d86fb34fa7 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> @@ -55,6 +55,16 @@ properties:
> reg:
> maxItems: 1
>
> + power-domains:
> + description:
> + A phandle and PM domain specifier for the MMCX power domain.
> + maxItems: 1
> +

Should you perhaps state that this is a parent domain? Or it isn't?

Related to this and because this is a power domain provider, you
should probably reference the common power-domain bindings somewhere
here. Along the lines of this:

- $ref: power-domain.yaml#

As an example, you could have a look at
Documentation/devicetree/bindings/power/pd-samsung.yaml.

> + required-opps:
> + description:
> + Performance state to use for MMCX to enable register access.
> + maxItems: 1

According to the previous discussions, I was under the assumption that
this property belongs to a consumer node rather than in the provider
node, no?

> +
> required:
> - compatible
> - reg
> @@ -64,6 +74,15 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +# Either both properties are present or both are absent
> +dependencies:
> + power-domains:
> + required:
> + - required-opps
> + required-opps:
> + required:
> + - power-domains
> +
> additionalProperties: false
>
> examples:
> --
> 2.30.2
>

Kind regards
Uffe

\
 
 \ /
  Last update: 2021-07-01 18:18    [W:0.108 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site