lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] MFD: intel_pmt: Remove OOBMSM device
On Thu, 01 Jul 2021, Andy Shevchenko wrote:

> On Thursday, July 1, 2021, Lee Jones <lee.jones@linaro.org> wrote:
>
> > On Thu, 01 Jul 2021, Hans de Goede wrote:
> >
> > > Hi,
> > >
> > > On 6/30/21 11:11 PM, David E. Box wrote:
> > > > On Wed, 2021-06-30 at 11:15 +0100, Lee Jones wrote:
> > > >> On Thu, 17 Jun 2021, David E. Box wrote:
> > > >>
> > > >>> Unlike the other devices in intel_pmt, the Out of Band Management
> > > >>> Services
> > > >>> Module (OOBMSM) is actually not a PMT dedicated device. It can also
> > > >>> be used
> > > >>> to describe non-PMT capabilities. Like PMT, these capabilities are
> > > >>> also
> > > >>> enumerated using PCIe Vendor Specific registers in config space. In
> > > >>> order
> > > >>> to better support these devices without the confusion of a
> > > >>> dependency on
> > > >>> MFD_INTEL_PMT, remove the OOBMSM device from intel_pmt so that it
> > > >>> can be
> > > >>> later placed in its own driver. Since much of the same code will be
> > > >>> used by
> > > >>> intel_pmt and the new driver, create a new file with symbols to be
> > > >>> used by
> > > >>> both.
> > > >>>
> > > >>> While performing this split we need to also handle the creation of
> > > >>> platform
> > > >>> devices for the non-PMT capabilities. Currently PMT devices are
> > > >>> named by
> > > >>> their capability (e.g. pmt_telemetry). Instead, generically name
> > > >>> them by
> > > >>> their capability ID (e.g. intel_extnd_cap_2). This allows the IDs
> > > >>> to be
> > > >>> created automatically. However, to ensure that unsupported devices
> > > >>> aren't
> > > >>> created, use an allow list to specify supported capabilities.
> > > >>>
> > > >>> Signed-off-by: David E. Box <david.e.box@linux.intel.com>
> > > >>> ---
> > > >>> MAINTAINERS | 1 +
> > > >>> drivers/mfd/Kconfig | 4 +
> > > >>> drivers/mfd/Makefile | 1 +
> > > >>> drivers/mfd/intel_extended_caps.c | 208
> > > >>> +++++++++++++++++++++
> > > >>
> > > >> Please consider moving this <whatever this is> out to either
> > > >> drivers/pci or drivers/platform/x86.
> > > >
> > > > None of the cell drivers are in MFD, only the PCI drivers from which
> > > > the cells are created. I understood that these should be in MFD. But
> > > > moving it to drivers/platform/x86 would be fine with me. That keeps the
> > > > code together in the same subsystem. Comment from Hans or Andy?
> > >
> > > I'm fine with moving everything to drivers/platform/x86, but AFAIK
> > > usually the actual code which has the MFD cells and creates the
> > > child devices usually lives under drivers/mfd
> >
> > Correct. It must.
>
> It’s definitely not the first time you are talking about, but it may be the
> first time I asked why it’s not enforced overall. Last time I have checked
> it was like 5-7 MFD uses outside the MFD folder. Are you going to fix that?

Because I can't NACK patches that weren't sent to me. :)

I'll probably look into 'fixing' it when I get some free time.

> > No MFD API users outside of drivers/mfd please.

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2021-07-01 14:08    [W:0.051 / U:2.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site