lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] habanalabs: update firmware header files
Date
From: Ofir Bitton <obitton@habana.ai>

Update recent changes made in firmware header files, which contain
a minor COMMS protocol change and new error status definitions.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/common/firmware_if.c | 4 +--
.../habanalabs/include/common/hl_boot_if.h | 35 ++++++++++++++++---
.../habanalabs/include/gaudi/gaudi_reg_map.h | 2 --
3 files changed, 33 insertions(+), 8 deletions(-)

diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 2e4d04ec6b53..bac25a60650f 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -1953,8 +1953,8 @@ static void hl_fw_dynamic_update_linux_interrupt_if(struct hl_device *hdev)
if (!hdev->asic_prop.gic_interrupts_enable &&
!(hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN)) {
- dyn_regs->gic_host_halt_irq = dyn_regs->gic_host_irq_ctrl;
- dyn_regs->gic_host_ints_irq = dyn_regs->gic_host_irq_ctrl;
+ dyn_regs->gic_host_halt_irq = dyn_regs->gic_host_pi_upd_irq;
+ dyn_regs->gic_host_ints_irq = dyn_regs->gic_host_pi_upd_irq;

dev_warn(hdev->dev,
"Using a single interrupt interface towards cpucp");
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index fa8a5ad2d438..d762bb2f1204 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -78,6 +78,26 @@
* CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL Device is unusable and customer support
* should be contacted.
*
+ * CPU_BOOT_ERR0_ARC0_HALT_ACK_NOT_RCVD HALT ACK from ARC0 is not received
+ * within specified retries after issuing
+ * HALT request. ARC0 appears to be in bad
+ * reset.
+ *
+ * CPU_BOOT_ERR0_ARC1_HALT_ACK_NOT_RCVD HALT ACK from ARC1 is not received
+ * within specified retries after issuing
+ * HALT request. ARC1 appears to be in bad
+ * reset.
+ *
+ * CPU_BOOT_ERR0_ARC0_RUN_ACK_NOT_RCVD RUN ACK from ARC0 is not received
+ * within specified timeout after issuing
+ * RUN request. ARC0 appears to be in bad
+ * reset.
+ *
+ * CPU_BOOT_ERR0_ARC1_RUN_ACK_NOT_RCVD RUN ACK from ARC1 is not received
+ * within specified timeout after issuing
+ * RUN request. ARC1 appears to be in bad
+ * reset.
+ *
* CPU_BOOT_ERR0_ENABLED Error registers enabled.
* This is a main indication that the
* running FW populates the error
@@ -98,6 +118,10 @@
#define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL (1 << 11)
#define CPU_BOOT_ERR0_PLL_FAIL (1 << 12)
#define CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL (1 << 13)
+#define CPU_BOOT_ERR0_ARC0_HALT_ACK_NOT_RCVD (1 << 14)
+#define CPU_BOOT_ERR0_ARC1_HALT_ACK_NOT_RCVD (1 << 15)
+#define CPU_BOOT_ERR0_ARC0_RUN_ACK_NOT_RCVD (1 << 16)
+#define CPU_BOOT_ERR0_ARC1_RUN_ACK_NOT_RCVD (1 << 17)
#define CPU_BOOT_ERR0_ENABLED (1 << 31)
#define CPU_BOOT_ERR1_ENABLED (1 << 31)

@@ -313,10 +337,7 @@ struct cpu_dyn_regs {
__le32 hw_state;
__le32 kmd_msg_to_cpu;
__le32 cpu_cmd_status_to_host;
- union {
- __le32 gic_host_irq_ctrl;
- __le32 gic_host_pi_upd_irq;
- };
+ __le32 gic_host_pi_upd_irq;
__le32 gic_tpc_qm_irq_ctrl;
__le32 gic_mme_qm_irq_ctrl;
__le32 gic_dma_qm_irq_ctrl;
@@ -462,6 +483,11 @@ struct lkd_fw_comms_msg {
* Do not wait for BMC response.
*
* COMMS_LOW_PLL_OPP Initialize PLLs for low OPP.
+ *
+ * COMMS_PREP_DESC_ELBI Same as COMMS_PREP_DESC only that the memory
+ * space is allocated in a ELBI access only
+ * address range.
+ *
*/
enum comms_cmd {
COMMS_NOOP = 0,
@@ -474,6 +500,7 @@ enum comms_cmd {
COMMS_GOTO_WFE = 7,
COMMS_SKIP_BMC = 8,
COMMS_LOW_PLL_OPP = 9,
+ COMMS_PREP_DESC_ELBI = 10,
COMMS_INVLD_LAST
};

diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h b/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
index d95d4162ae2c..b9bd5a7f71eb 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
@@ -12,8 +12,6 @@
* PSOC scratch-pad registers
*/
#define mmHW_STATE mmPSOC_GLOBAL_CONF_SCRATCHPAD_0
-/* TODO: remove mmGIC_HOST_IRQ_CTRL_POLL_REG */
-#define mmGIC_HOST_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
#define mmGIC_HOST_PI_UPD_IRQ_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
#define mmGIC_TPC_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_2
#define mmGIC_MME_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_3
--
2.25.1
\
 
 \ /
  Last update: 2021-07-01 13:28    [W:0.034 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site