lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/3] usb: renesas_usbhs: Enable support for more than two clks
Hi Adam,

Thanks for your patch!

On Wed, Jun 30, 2021 at 7:30 PM Adam Ford <aford173@gmail.com> wrote:
> The RZ/G2 boards expect there to be an external clock reference for
> USBHS controller, but this could be set by a programmable clock.
> For those devices using a programmable clock, there need to be two
> additional clocks beyond the internal reference clocks:
>
> rcar-usb2-clock-sel to specify we using an external clock, and
> the external reference clock itself.

Something is missing in the above sentence?

>
> Make this driver dynamically enable all the clocks assigned to it
> instead of only enabling the first one or two clocks.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
>
> diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
> index 3af91b2b8f76..255e4bd68ed3 100644
> --- a/drivers/usb/renesas_usbhs/common.c
> +++ b/drivers/usb/renesas_usbhs/common.c
> @@ -297,6 +297,8 @@ static bool usbhsc_is_multi_clks(struct usbhs_priv *priv)
>
> static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
> {
> + unsigned int i;
> +
> if (!usbhsc_is_multi_clks(priv))
> return 0;
>
> @@ -309,11 +311,13 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
> * To backward compatibility with old DT, this driver checks the return
> * value if it's -ENOENT or not.
> */
> - priv->clks[1] = of_clk_get(dev_of_node(dev), 1);
> - if (PTR_ERR(priv->clks[1]) == -ENOENT)
> - priv->clks[1] = NULL;
> - else if (IS_ERR(priv->clks[1]))
> - return PTR_ERR(priv->clks[1]);
> + for (i = 1; i < ARRAY_SIZE(priv->clks); i++) {
> + priv->clks[1] = of_clk_get(dev->of_node, i);
> + if (PTR_ERR(priv->clks[i]) == -ENOENT)
> + priv->clks[i] = NULL;
> + else if (IS_ERR(priv->clks[i]))
> + return PTR_ERR(priv->clks[i]);
> + }

This is identical to the current code, as ARRAY_SIZE(priv->clks) == 2.
Probably you wanted to increase usbhs_priv.clks[], too?

Does it make sense to start using the clk_bulk*() API?

>
> return 0;
> }

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2021-07-01 11:08    [W:0.107 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site