lkml.org 
[lkml]   [2021]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] arm64: dts: ti: k3-am64-main: Update the location of ATF in SRAM and increase its max size
From
Date


On 07/06/21 7:08 pm, Aswath Govindraju wrote:
> Due to a limitation for USB DFU boot mode, SPL load address has to be less
> than or equal to 0x70001000. So, load address of SPL and ATF have been
> moved to 0x70000000 and 0x701a0000 respectively.
>
> Also, the maximum size of ATF has been increased to 0x1c000 [1].
>
> Therefore, update ATF's location and maximum size accordingly in the device
> tree file.
>
> [1] - https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=2fb5312f61a7de8b7a70e1639199c4f14a10b6f9
>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index ca59d1f711f8..fcd12b6f10f6 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -13,8 +13,8 @@
> #size-cells = <1>;
> ranges = <0x0 0x00 0x70000000 0x200000>;
>
> - atf-sram@0 {
> - reg = <0x0 0x1a000>;
> + atf-sram@1a0000 {
> + reg = <0x1a0000 0x1c000>;

After thinking a bot more, isn't size be 0x20000?
ATF is allocated with 125KB no? no point keeping the ~3 as hole IMO.

Thanks and regards,
Lokesh

> };
> };
>
>

\
 
 \ /
  Last update: 2021-06-09 16:30    [W:0.090 / U:1.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site