lkml.org 
[lkml]   [2021]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 2/3] dmaengine: ptdma: register PTDMA controller as a DMA resource
On 02-06-21, 12:22, Sanjay R Mehta wrote:

> +static void pt_do_cmd_complete(unsigned long data)
> +{
> + struct pt_tasklet_data *tdata = (struct pt_tasklet_data *)data;
> + struct pt_cmd *cmd = tdata->cmd;
> + struct pt_cmd_queue *cmd_q = &cmd->pt->cmd_q;
> + u32 tail;
> +
> + tail = lower_32_bits(cmd_q->qdma_tail + cmd_q->qidx * Q_DESC_SIZE);

why extract tail in non error case?

> +static int pt_issue_next_cmd(struct pt_dma_desc *desc)
> +{
> + struct pt_passthru_engine *pt_engine;
> + struct pt_dma_cmd *cmd;
> + struct pt_device *pt;
> + struct pt_cmd *pt_cmd;
> + struct pt_cmd_queue *cmd_q;
> +
> + cmd = list_first_entry(&desc->cmdlist, struct pt_dma_cmd, entry);
> + desc->issued_to_hw = 1;

Why do you need this, the descriptor should be in vc.desc_issued list

> +static void pt_free_active_cmd(struct pt_dma_desc *desc)
> +{
> + struct pt_dma_cmd *cmd = NULL;
> +
> + if (desc->issued_to_hw)
> + cmd = list_first_entry_or_null(&desc->cmdlist, struct pt_dma_cmd,
> + entry);

single line pls and use lists provided..


> +static struct pt_dma_desc *pt_handle_active_desc(struct pt_dma_chan *chan,
> + struct pt_dma_desc *desc)
> +{
> + struct dma_async_tx_descriptor *tx_desc;
> + struct virt_dma_desc *vd;
> + unsigned long flags;
> +
> + /* Loop over descriptors until one is found with commands */
> + do {
> + if (desc) {
> + /* Remove the DMA command from the list and free it */
> + pt_free_active_cmd(desc);
> + if (!desc->issued_to_hw) {
> + /* No errors, keep going */
> + if (desc->status != DMA_ERROR)
> + return desc;
> + /* Error, free remaining commands and move on */
> + pt_free_cmd_resources(desc->pt,
> + &desc->cmdlist);

single line again

> +static struct pt_dma_desc *pt_alloc_dma_desc(struct pt_dma_chan *chan,
> + unsigned long flags)
> +{
> + struct pt_dma_desc *desc;
> +
> + desc = kmem_cache_zalloc(chan->pt->dma_desc_cache, GFP_NOWAIT);
> + if (!desc)
> + return NULL;
> +
> + vchan_tx_prep(&chan->vc, &desc->vd, flags);
> +
> + desc->pt = chan->pt;
> + desc->issued_to_hw = 0;
> + INIT_LIST_HEAD(&desc->cmdlist);

why do you need your own list, the lists in vc should suffice?

> +static int pt_resume(struct dma_chan *dma_chan)
> +{
> + struct pt_dma_chan *chan = to_pt_chan(dma_chan);
> + struct pt_dma_desc *desc = NULL;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&chan->vc.lock, flags);
> + pt_start_queue(&chan->pt->cmd_q);
> + desc = __pt_next_dma_desc(chan);
> + spin_unlock_irqrestore(&chan->vc.lock, flags);
> +
> + /* If there was something active, re-start */
> + if (desc)
> + pt_cmd_callback(desc, 0);

this doesn't sound correct. In pause yoy stop the queue, so start of the
queue should be done here... Why grab a descriptor?

> +static int pt_terminate_all(struct dma_chan *dma_chan)
> +{
> + struct pt_dma_chan *chan = to_pt_chan(dma_chan);
> +
> + vchan_free_chan_resources(&chan->vc);

what about the descriptors, are you not going to clear the lists and
free them..

> +int pt_dmaengine_register(struct pt_device *pt)
> +{
> + struct pt_dma_chan *chan;
> + struct dma_device *dma_dev = &pt->dma_dev;
> + char *cmd_cache_name;
> + char *desc_cache_name;
> + int ret;
> +
> + pt->pt_dma_chan = devm_kzalloc(pt->dev, sizeof(*pt->pt_dma_chan),
> + GFP_KERNEL);
> + if (!pt->pt_dma_chan)
> + return -ENOMEM;
> +
> + cmd_cache_name = devm_kasprintf(pt->dev, GFP_KERNEL,
> + "%s-dmaengine-cmd-cache",
> + pt->name);
> + if (!cmd_cache_name)
> + return -ENOMEM;
> +
> + pt->dma_cmd_cache = kmem_cache_create(cmd_cache_name,
> + sizeof(struct pt_dma_cmd),
> + sizeof(void *),
> + SLAB_HWCACHE_ALIGN, NULL);
> + if (!pt->dma_cmd_cache)
> + return -ENOMEM;
> +
> + desc_cache_name = devm_kasprintf(pt->dev, GFP_KERNEL,
> + "%s-dmaengine-desc-cache",
> + pt->name);
> + if (!desc_cache_name) {
> + ret = -ENOMEM;
> + goto err_cache;
> + }
> +
> + pt->dma_desc_cache = kmem_cache_create(desc_cache_name,
> + sizeof(struct pt_dma_desc),
> + sizeof(void *),

sizeof void ptr?

> + SLAB_HWCACHE_ALIGN, NULL);
> + if (!pt->dma_desc_cache) {
> + ret = -ENOMEM;
> + goto err_cache;
> + }
> +
> + dma_dev->dev = pt->dev;
> + dma_dev->src_addr_widths = DMA_SLAVE_BUSWIDTH_64_BYTES;
> + dma_dev->dst_addr_widths = DMA_SLAVE_BUSWIDTH_64_BYTES;
> + dma_dev->directions = DMA_MEM_TO_MEM;
> + dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
> + dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
> + dma_cap_set(DMA_INTERRUPT, dma_dev->cap_mask);
> + dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);

Why DMA_PRIVATE ? this is a dma mempcy controller ...
--
~Vinod

\
 
 \ /
  Last update: 2021-06-08 22:02    [W:0.016 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site